Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Surround
Ausstattungsliste: Krix DYNAMIX MK3
Specification | |
Frequency Range | 45Hz-40kHz in room response |
Power Handling | 20 – 120 Watts RMS recommended amplifier power |
Sensitivity | 88dB for 2.83 volts at 1 metre |
Impedance | Nominally 6 Ohms (minimum 3.6 Ohms) |
Configuration | 2-way |
Enclosure Type | Bass reflex, front vented with rear terminal plate |
Low Frequency Drivers | Cast aluminium basket with a nominal 130mm (5″) doped curvilinear paper cone. 30mm (1.2″) vented magnet voice coil wound on high temperature kapton former, with copper shorting ring |
High Frequency Driver | 26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion |
Input Terminals | Gold plated binding posts |
Mounting | Key-hole style bracket, located on the rear of the cabinet |
Dimensions | 355mm high x 245mm wide x 200mm deep at the top (110mm deep at the bottom) |
Weight | 6kg each |