Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Stereo
Ausstattungsliste: Spendor S3/5R2
Features | |
Optimally damped, infinite baffle for easy room placement | |
Spendor long throw 14cm drive unit with phase correction | |
New 22mm wide surround tweeter for extended response | |
Single wired for consistent sound with all equipment | |
Gold plated binding posts on the rear | |
Multiple panel thicknesses to reduce coincidental resonance | |
Classic thin-wall design to reference standards | |
Specification | |
Description | 2-way stand or open-shelf mounting loudspeaker |
Enclosure type | Sealed |
HF drive unit | 22mm wide-surround dome with fluid cooling |
MF / LF drive unit | Spendor 140mm ep39 cone |
Sensitivity | 84dB for 1 watt at 1 metre |
Crossover point | 5 kHz |
Frequency response | 75 Hz to 20 kHz ± 3dB anechoic |
Typical in-room response | -6dB at 60 Hz |
Impedance | 8 ohms nominal |
Impedance minimum | 6.2 ohms |
Power handling | 100 watts unclipped programme |
Terminals | 2/3 way binding posts single-wired |
Cabinet (HxWxD) | 305 x 165 x 190mm |
Finish | black ash, cherry, light oak, dark walnut |
Weight | 4.6 kg each |
Stand height | 500-650mm (not supplied) |
Accesories | Wall mounting bracket (specify when ordering) |
301-2009
Frankonia HiFi Studio |