Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein

Kategorie: Musikserver


Ausstattungsliste: Linn Sekrit DS-I


Ausstattung & technische Daten
Technical Specifications
Date of introduction April 2010 (original model released October 2009)
Type integrated ds player, pre-amplifier and power amplifier
Dimensions (without feet) (H) 80 mm x (W) 190 mm x (D) 346 mm (H) 3.15 inches x (W) 7.5 inches x (D)13.6 inches
Rrack height 2u (fits two units side-by-side in 19 inch rack)
Weight 2.6 kg / 5.7 lb
Mains supply voltage (auto ranging) 100 – 120 V ac (±10%) 50 – 60 hz, 200 – 240 V ac (±10%) 50 – 60 hz
Fuse 250 V, t1.6 a (not user replaceable)
Power consumption standby < 20 W maximum continuous 400 W
supported file types FLACflac, ALAC alac, WAaV, MP3, WMA a (except lossless), AIFF aiff, AACaac, OGG
Audio sample rates 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16 – 24 bits
control protocol compatible with uPnP™ media servers, UuPnP™ aV 1.0 control points
local control ir remote controllable (handset supplied separately)
Back Panel Connectors
Analog audio line in (L+R) RCA phono, line out (L+R) RCA phono
Digital Audio sPDIF Idif in rca phono Optical in TtOSLINslinK
Sspeaker outputs 4 mm banana/binding post/spade
control ethernet 100Base-RJ45 RS 232 RJ11 (for proxy control of connected linn products only) ir flasher 3.5 mm jack (x2) RC rc5 accessory port RJ45 (for control by linn Basik 3 RCU )
Input/Output Electrical
Analog line inputs Max input voltage 2.5 V rMSs, 3.5 V peak input impedance 10 kΩ
SPDIF dif digital input Max input voltage 3 V peak input impedance 75 Ω
Analog line outputs Max output voltage 1.8 V rMSs, 2.5 V peak (0 dBFS fs @ vol. 85) Output impedance 300 Ω DC dc offset voltage < 5 mV
Sspeaker outputs Max output voltage 30 V peak dc offset voltage < 20 mV
Audio Performance
Line inputs thd+Nn < 0.005 % D dynamik range 110 dB signal to noise ratio 110 dB frequency range 5 hz - 23 kHhz
Line outputs thd+< 0.005 % dynamik range 105 dB signal to noise ratio 105 dB frequency range 0 hz - 30 kHhz
Power amplifier Power output 70 W rMS s per channel into 4 Ω thd+Nn < 0.01 % (1 kHhz, 10W rMS s into 4 Ω) dynamic range 95 dB signal to noise ratio 95 dB channel balance < ± 0.2 dB
channel separation > 75 dB (1 kHz into 4 Ω) damping factor > 90 - 25 kHz (-3 dB into 4 Ω) frequency response 6 hz - 25 kHz (-3 dB into 4 Ω) Gain 23.6 dB (relative to line out)
Digital pre-amplifier Gain range - 80 dB to + 20 dB Gain resolution 1 dB unity gain volume 0 dB = vol. 80 line input scaling 0 dBFS = 2.5 V RMS line output scaling 0 dBFS = 1 V RMS
speaker output voltage 15 V peak
speaker output power 20 W into 4 ΩW
Folgen Sie uns:
  • facebook - follow us
  • twitter - follow us
  • google - follow us
Interessante Testportale:
  • www.heimwerker-test.de
  • www.hausgeraete-test.de
  • www.spielwaren-check.de
Allgemeine Händlersuche
Landkarte PLZ0 PLZ1 PLZ2 PLZ3 PLZ4 PLZ5 PLZ6 PLZ7 PLZ8 PLZ9

Klicken Sie auf Ihre PLZ oder wählen Sie ein Land

Händler des Tages