Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Lexicon RV-6
Highlights | |
Immersive Surround Sound Receiver | |
Logic7 Immersion natural sound up mixer | |
Dolby Atmos & DTS:X 7.1.4 decoding | |
IMAX Enhanced | |
DTS Virtual:X | |
Dolby Vision compatible | |
4K (UHD) HDMI2.0a with HDCP2.2 | |
7 HDMI inputs, 3 HDMI outputs, ARC compatible | |
Dirac Live® for Lexicon room correction | |
Spotify® Connect enabled | |
Cirrus CS42528 audiophile DAC | |
Class A/B power amplification | |
Ethernet, RS232 and IR control | |
Lexicon AV control app | |
General Specifications | |
Continuous power output, per channel | 8Ω/4Ω |
Residual noise & hum | (A-wtd) <0.15mV |
Mains voltage | 110–120V or 220–240V, 50–60Hz |
Power consumption (maximum) | 1.5kW (Thermal dissipation approx. 5200 BTU/hour) |
Power consumption (idle, typical) | 100W (Thermal dissipation approx. 340 BTU/hour) |
Power consumption (standby) | <0.5W |
Dimensions | |
W x D (including speaker terminals) x H (including feet) | 433 x 425 x 171mm |
Weight (net) | 15.5kg |
Audio Interface | |
Nominal output level | 1V RMS |
Output impedance | 560Ω |
THD+N (20Hz—20kHz) | -100dB |
Audio Output | |
Maximum output level into 32Ω | 2Vrms |
Output impedance | <5Ω |
Audio Input | |
Maximum input | 4.5V rms |
Nominal sensitivity | 1V, 2V, 4V (user adjustable) |
Input impedance | 47kΩ |
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct | 100dB/110dB |
Frequency response | 20Hz—20kHz at 0.2dB |