Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Soundprojektoren
Ausstattungsliste: Lexicon QLI-32
Specification | |
Type | 32 Channel QuantumLogic™ Immersion Processor |
Front Panel Indicators | On LED – indicates power supply is active and unit is powered |
Status LED – indicates when QLI configuration is occurring (GREEN) or when a fault has occurred (RED) | |
Audio Source LEDs – indicates how the unit is configured (Analog, AES/EBU, or BLU link) | |
Input Configuration – indicates what input the unit is configured for (Stereo, 5.1, or 7.1) | |
Audio Inputs | Mic Input for Calibration and Auto-EQ per SMPTE 202 |
8 Channel Analog Input – 25-pin D-sub female connector for Stereo, 5.1, and 7.1 systems, 300mV nominal input level | |
16 Channel AES/EBU Input – 2 stacked RJ-45 connectors; each connector can have up to 8 channels of audio | |
BLU link – 2 stacked RJ-45 connectors; can link with other BLU link enabled products | |
Audio Output | BLU link – 2 stacked RJ-45 connectors |
Network Control | Ethernet Interface - 1 RJ-45 connector for configuration and control |
Power | Universal power supply 100VAC – 240VAC (+/-10%), 50/60Hz |
15A IEC Inlet with field serviceable fuse | |
Dimensions | 1.67” (4.24 cm) x 19” (48.26 cm) x 10.5” (26.67 cm) (H x W x D) |
Automation Control for | Source Selection |
Input Configuration | |
QLI Bypass | |
Mute | |
Communications | RJ-45 female connector for configuration and automation control |
12-Pin block connector for configuration, mute, QLI bypass, and source selection | |
Performance Specifications | Signal to Noise Ratio: 110dB (20Hz – 20kHz) |
AES/EBU Sampling Rate: 48k, 96k | |
BLU link Sampling Rate: 48k | |
Features | 1/3 Octave graphic EQ per channel |
1/3 Octave real time analyzer | |
Parametric EQ for LFE | |
QuantumLogic Surround technology |