
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahrenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: K-array Mugello-KH3
General | |
Type | Loudspeaker |
Active line array element | |
Transducers | 2x 12” neodymium magnet woofer with 2.5” voice coil |
2x compression driver with 2.5” voice coil | |
Frequency Response | 120 Hz – 19 kHz (-6 dB) |
Maximum SPL | 138 dB peak |
Coverage | V. 20° | H. 110° |
Connectors | Analog: 2x XLR (bal) input signal + 2x XLR (bal) parallel output |
Digital: 1x XLR AES3 input + 1x XLR AES3 output | |
Control | Remote control with dedicated PC software via USB or RS485. |
Onboard touch screen display. | |
Digital signal processor | |
Built-in DSP | Input gain, delay up to 330 ms, 8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), FIR filter for electronic beam steering Onboard preset, Level and temperature remote monitoring |
Amplifier | |
Type | 2-ch., switch mode, class D |
Output power | 2x 1600 W @ 4 Ω 1% THD+N |
Power consumption | 300 W @ 8 Ω load, Pink noise 1/8 rated power |
Protections | Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection |
Operating range | 100-240V AC, 50-60 Hz with PFC |
Mains connector | powerCON with link inlet |
Handling and Finishes | |
Dimensions | 1218 x 456 x 210 mm with rigging hardware |
1104 x 370 x 200 mm net dimensions | |
Weight | 43,6 kg (with rigging hardware) |
Material | Wood |
Color | Black, White, Custom RAL |