Bereits im Januar haben wir Ihnen die Canvas HiFi, die Mutter aller Soundbars vorgestellt. Nun hat der Hersteller an entscheidender Stelle nachgelegt – beim Klang.
>> Mehr erfahren>> Alle anzeigen
So lautet der Slogan der Firma Revox. Eine Marke, die man wie wenige andere mit der Kombination aus Technik und Design verbindet. Die Studiomaster A200 ist dafür ein schönes Beispiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXP 8.2
| Performance | |
| Frequency Response (-3 dB) (1) Full Range Mode | 75 Hz - 35 kHz |
| Frequency Range (-10 dB) (1) Full Range Mode | 60 Hz - 45 kHz |
| Frequency Response (-3 dB) (1) High Pass Mode | 100 Hz - 35 kHz |
| Frequency Range (-10 dB) (1) High Pass Mode | 80 Hz - 45 kHz |
| Dispersion (-6 dB) | 90 degrees conical |
| Driver Complement | 1 x 200 mm (8.00") constant directivity Dual Concentric |
| Crossover | Passive 360 Hz and 1.5 kHz, with dynamic HF protection |
| Directivity factor (Q) | 8.1 averaged 1 kHz to 8 kHz |
| Directivity index (DI) | 9.2 averaged 1 kHz to 8 kHz |
| Rated Maximum SPL (2) | Average: 117 dB |
| Peak: 123 dB | |
| Distortion | |
| 10% Full Power (8.94 V) | 2nd Harmonic 250 Hz: 0.58%, 1 kHz: 0.34%, 10 kHz: 1.73% |
| 3rd Harmonic 250 Hz: 0.34%, 1 kHz: 0.69%, 10 kHz: 0.15% | |
| 1% Full Power (2.83 V) | 2nd Harmonic 250 Hz: 0.15%, 1 kHz: 0.11%, 10 kHz: 1.73% |
| 3rd Harmonic 250 Hz: 0.15%, 1 kHz: 0.37%, 10 kHz: 0.22% | |
| Amplifier | |
| Maximum signal input for clip | Input attenuator at Maximum: +4.5 dBu (Hard clip will occur at 14.5 dBu input signal) |
| Dynamic Range | 106 dB |
| Efficiency | >90% |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 10 kOhms (unbalanced) |
| 20 kOhms (balanced) | |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Universal mains input |
| System Type | High efficiency, regulated switch mode Power supply |
| Efficiency | >85% typical |
| Input voltage | 100 Vac - 240 Vac +/- 10%, 50 - 60 Hz +/-10% |
| Mains fuse | Internal |
| Fuse type | 3.15AT |
| Mains | Inrush current limiter |
| Standby Power consumption | < 1 W |
| Idle Power consumption | < 15 W |
| Maximum Power consumption | 300 W |
| Protection Systems | |
| Over Current | Output current limiter, always active |
| Clip limiter | Output voltage clip limiter, always active |
| Temperature | Over temperature causes protective mute |
| Brownout | Automatic protection & recovery |
| Mains | Inrush current limiter |
| Indicators | 1 x Power LED 1 x Signal LED 1 x Limit LED (Power LED: Red = Standby, Green = On, Yellow = Temperature protection active) |
| Amplifier Type | Inherently bridged, globally modulated, high Performance single channel class D |
| Construction | |
| Enclosure | 25.3 litre, 15 mm (0.62") birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x Neutrik Powercon |
| Controls & Indicators | Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110 Hz) Power Mode Switch Power Switch |
| Dimensions (H x W x D) | 590 x 280 x 275 mm |
| Net Weight (ea) | 15.5 kg (34.2 lbs) |
|
305-2128
MD Sound GmbH & Co. KG |



