462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VXP 8.2
Ausstattung & technische Daten
| Performance | |
| Frequency Response (-3 dB) (1) Full Range Mode | 75 Hz - 35 kHz |
| Frequency Range (-10 dB) (1) Full Range Mode | 60 Hz - 45 kHz |
| Frequency Response (-3 dB) (1) High Pass Mode | 100 Hz - 35 kHz |
| Frequency Range (-10 dB) (1) High Pass Mode | 80 Hz - 45 kHz |
| Dispersion (-6 dB) | 90 degrees conical |
| Driver Complement | 1 x 200 mm (8.00") constant directivity Dual Concentric |
| Crossover | Passive 360 Hz and 1.5 kHz, with dynamic HF protection |
| Directivity factor (Q) | 8.1 averaged 1 kHz to 8 kHz |
| Directivity index (DI) | 9.2 averaged 1 kHz to 8 kHz |
| Rated Maximum SPL (2) | Average: 117 dB |
| Peak: 123 dB | |
| Distortion | |
| 10% Full Power (8.94 V) | 2nd Harmonic 250 Hz: 0.58%, 1 kHz: 0.34%, 10 kHz: 1.73% |
| 3rd Harmonic 250 Hz: 0.34%, 1 kHz: 0.69%, 10 kHz: 0.15% | |
| 1% Full Power (2.83 V) | 2nd Harmonic 250 Hz: 0.15%, 1 kHz: 0.11%, 10 kHz: 1.73% |
| 3rd Harmonic 250 Hz: 0.15%, 1 kHz: 0.37%, 10 kHz: 0.22% | |
| Amplifier | |
| Maximum signal input for clip | Input attenuator at Maximum: +4.5 dBu (Hard clip will occur at 14.5 dBu input signal) |
| Dynamic Range | 106 dB |
| Efficiency | >90% |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 10 kOhms (unbalanced) |
| 20 kOhms (balanced) | |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Universal mains input |
| System Type | High efficiency, regulated switch mode Power supply |
| Efficiency | >85% typical |
| Input voltage | 100 Vac - 240 Vac +/- 10%, 50 - 60 Hz +/-10% |
| Mains fuse | Internal |
| Fuse type | 3.15AT |
| Mains | Inrush current limiter |
| Standby Power consumption | < 1 W |
| Idle Power consumption | < 15 W |
| Maximum Power consumption | 300 W |
| Protection Systems | |
| Over Current | Output current limiter, always active |
| Clip limiter | Output voltage clip limiter, always active |
| Temperature | Over temperature causes protective mute |
| Brownout | Automatic protection & recovery |
| Mains | Inrush current limiter |
| Indicators | 1 x Power LED 1 x Signal LED 1 x Limit LED (Power LED: Red = Standby, Green = On, Yellow = Temperature protection active) |
| Amplifier Type | Inherently bridged, globally modulated, high Performance single channel class D |
| Construction | |
| Enclosure | 25.3 litre, 15 mm (0.62") birch plywood, vented and internally braced |
| Finish | Textured black or white paint (custom colours on request) Powder coated perforated steel grille Airnet cloth behind |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x Neutrik Powercon |
| Controls & Indicators | Level Control Power LED (Blue) Signal LED (Green) Limit/Protect LED (Red) Full Range / HighPass Switch (110 Hz) Power Mode Switch Power Switch |
| Dimensions (H x W x D) | 590 x 280 x 275 mm |
| Net Weight (ea) | 15.5 kg (34.2 lbs) |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
