Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Raumprozessoren
Ausstattungsliste: Mini-DSP miniDSP 2x4
Specification | |
Type | Digital Signal Processor |
Digital Signal Processor Engine | Analog Devices Fixed point DSP |
Internal Processing resolution & Sample rate | 24-56 bit / 48 kHz |
Input/Ouput Configuration | 2 in / 4 out |
Audio Input Connectivity | Unbalanced input, RCA terminated |
Audio Output Connectivity | Unbalanced output, RCA terminated |
Input / Output Max Levels | IN: 0.9Vrms / 2Vrms (jumper–selectable) |
OUT: 0.9Vrms | |
Input Impendance | 0.9Vrms position = 8.8 kΩ /2Vrms position = 20 kΩ |
Output Impedance | 560 Ω |
Calibration Software | miniDSP 2x4 plug-ins |
Filtering Technology | IIR |
DSP Presets | - |
Dimensions | 26x107x94 mm |
Power | Powered from USB cable 5 ~24Vdc input via DC 2.1mm round connect Current requirement: 150mA @5V |
Impulse Response Correction | No |
Infrared Remote Learning | No |
Win/Mac Compatible | Yes |
UMIK-1 Included | No |
Bass Management | No |
Room EQ Wizard Support | Yes |