488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
489_23584_2
Topthema: Träume werden wahr
Standlautsprecher · ESS AMT-1 D Revival
Für die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 603DC
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 75 Hz - 30 kHz |
| Frequency Range (-10 dB) (1) BM backcan model | 50 Hz - 30 kHz |
| Frequency Range (-10dB) (1) PI fitted with backcan | 46 Hz - 30 kHz |
| System Sensitivity (1W @ 1m) (2) | 91 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling (3) | Average: 80 W |
| Programme: 160 W | |
| Peak: 320 W | |
| Recommended Amplifier Power | 160 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 110 dB |
| Peak: 116 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation |
| 100 V: 60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation | |
| TRANSDUCERS | |
| Dual Concentric point source driver | 1 x 165 mm (6.5”) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 25 mm (1.00”) PEI dome |
| PHYSICAL | |
| Enclosure | Backcan: Zinc plated steel |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Pre Install (PI) | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Dimensions | |
| Bezel Diameter | 274.0 mm (10.79”) |
| BM Model: Front of ceiling to rear of backcan | 255.8 mm (10.07”) |
| BM Model: Front of ceiling to top of safety loop | 273.3 mm (10.76”) |
| PI Model: Front of ceiling surface to rear of speaker unit | 100.7 mm (3.96”) |
| PI Model: Front of accessory backcan bezel to top of safety loop | 168.5 mm (6.60”) |
| Hole cutout diameter (all models) | 253 mm (9.96”) |
| Net Weight (ea) | CMS 603DC BM: 6.60 kg (14.55 lbs) approx |
| CMS 603DC PI: 3.65 kg (8.05 lbs) approx | |
| CMS 603 PI Backcan: 5 kg (11.03 lbs) approx | |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Arco Grille | |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
