490_0_3
Anzeige
Topthema: Kinofeeling für Zuhause
Genießen Sie höchsten Komfort mit Kinosofas von Sofanella
Die hochwertigen Sessel und Sofas von Sofanella sind modern, bezahlbar und schaffen ein gemütliches sowie ein bequemes Heimkinoerlebnis
>> Mehr erfahren>> Alle anzeigen
488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 801DC
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) BM Back can | 47Hz - 30kHz |
| Frequency Range (-10dB) (1) BM Back can | 40Hz - 35kHz |
| Frequency Range (-10dB) (1) PI Back can | 41Hz - 35kHz |
| System Sensitivity (1W @1m) (2) | 92dB (1W = 2.83V for 8 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1kHz to 6kHz) | 100 degrees |
| Directivity Factor (Q) | 5.5 averaged 1kHz to 6kHz |
| Directivity Index (DI) | 7.2 averaged 1kHz to 6kHz |
| Rated Maximum SPL | Average: 112dB Peak: 118dB Average: 110dB (with THP60) |
| Power Handling (3) | Average: 90W Programme: 180W Peak: 360W |
| Recommended Amplifier Power | 180W @ 8 Ohms |
| Nominal Impedance | 8 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation 100V: 60W / 30W / 15W / OFF & Low Impedance operation |
| Crossover | 2kHz - 2nd order LF, 2nd order HF (with dynamic HF protection) |
| TRANSDUCERS | |
| Low Frequency | 1 x 200mm (8.00") Dual Concentric™ constant directivity driver with multi fibre paper pulp cone |
| High Frequency | 1 x 25mm (1.00") titanium dome with neodymium magnet system |
| PHYSICAL | |
| Enclosure | Back Can: Zinc plated steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Min / Max clamping range: 0.0mm (0.0") / 20.0mm (0.79") Recommended clamp torque: 1.5Nm |
| Back Can Options | Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts | 3 Sets of horizontal positions: 19 / 22 / 28mm 0.75 / 0.87 / 1.10" |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings | CE, UL-1480, UL-2043 |
| BM Hole Cutout Diameter | 295mm (11.61") |
| PI Hole Cutout Diameter | 295mm (11.61") |
| Dimensions | Bezel diameter: 325mm (12.80") BM model: Front of ceiling to rear of back can 310.50mm (12.22") BM model: Front of ceiling to top of safety loop 327.80mm (12.90") |
| PI model: Front of ceiling surface to rear of speaker unit 118.70mm (4.67") PI model: Front of accessory back can bezel to top of safety loop 168.50mm (6.63") | |
| Net Weight (ea) | CMS801 DC BM: 6.5kg (14.33lbs) CMS801 DC PI: 2.5kg (5.51lbs) CMS801 Plaster (Mud) Ring: 0.3685kg (0.81lbs) CMS801 PI 8 Ohm back can: 4kg (8.81lbs) CMS801 DC 60W transformer kit 8 Ohm : 1.095kg (2.41lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (mud) ring |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
