Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenRevox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 803DC
Specification | |
SYSTEM | |
Frequency Response (-3 dB) (1) BM Backcan | 47 Hz - 30 kHz |
Frequency Range (-10 dB) (1) BM backcan model | 40 Hz - 35 kHz |
Frequency Range (-10dB) (1) PI fitted with backcan | 41 Hz - 35 kHz |
System Sensitivity (1W @ 1m) (2) | 92 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle | 90 degrees conical |
Power Handling (3) | Average: 90 W |
Programme: 180 W | |
Peak: 360 W | |
Recommended Amplifier Power | 180 W @ 16 Ohms |
Nominal Impedance (Lo, Z) | 16 Ohms |
Rated Maximum SPL | Average: 112 dB |
Peak: 118 dB | |
With THP60 - Average: 110 dB | |
Transformer Taps (via front rotary switch) | 70 V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation |
100 V: 60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation | |
TRANSDUCERS | |
Dual Concentric point source driver | 1 x 200 mm (8.0”) Dual Concentric driver, using Omnimagnet technology |
Low Frequency | 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone |
High Frequency | 25 mm (1.00”) PEI dome |
PHYSICAL | |
Enclosure | Backcan: Zinc plated steel |
Baffle: Reflex loaded UL 94V-0 rated ABS | |
Grille: Steel, with weather resistant coating | |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Design | Security toggle clamp |
Blind Mount (BM) | Complete with fixed backcan |
Pre Install (PI) | Separate backcan for pre-installation |
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
Connectors | Removable locking connector with screw terminals with “loop through” facility |
Dimensions | |
Bezel Diameter | 319.0 mm (12.56”) |
BM Model: Front of ceiling to rear of backcan | 310.5 mm (12.22”) |
BM Model: Front of ceiling to top of safety loop | 327.7 mm (12.90”) |
PI Model: Front of ceiling surface to rear of speaker unit | 125.6 mm (4.94”) |
PI Model: Front of accessory backcan bezel to top of safety loop | 168.5 mm (6.63”) |
Hole cutout diameter (all models) | 295 mm (11.61”) |
Net Weight (ea) | CMS 803DC BM: 8.5 kg (18.74 lbs) |
CMS 803DC PI: 4.9 kg (10.80 lbs) | |
CMS 803 PI Backcan: 4.0 kg (8.81 lbs) | |
Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
Optional Accessories | Plaster (Mud) ring |
Arco Grille | |
Packed Quantity | 2 |
305-2128
MD Sound GmbH & Co. KG |