Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CODA Audio N-RAY
Specification | |
Type | 3-way Passive line array module |
Frequency response | 60 Hz – 22 kHz (-6 dB) |
Power handling AES / peak (passive) | 1000 W / 4000 W |
Max. peak SPL (with LINUS14) | 143 dB |
Amplification, Cabinets per Amplifier | LINUS5-C Optimum / Maximum: N/A |
LINUS10-C Optimum / Maximum: N/A | |
LINUS14D Optimum / Maximum: 12/16 | |
LINUS10 Optimum / Maximum: 06/10 | |
Dispersion horizontal | 90°, 120° or asymmetrical 105° |
Dispersion vertical | Array dependent: 0°, 1°, 2°, 3° to 12° in 1° steps |
Components Low frequency | 2x 6,5″ neodymium, water resistant cones, 2″ (50.8 mm) voice coil, 500 W (AES) each |
Components Mid/High frequency | Mid: 3.5″ (90 mm) voice coil, 150 W (AES) each High: 1.75″ (44.4 mm) voice coil, 80 W (AES) each |
Crossover point | 500 Hz / 6300 Hz passive |
Input connectors | 2x Neutrik™: 1x Input + 1x Link Cable |
Nominal impedance LF / MF+HF | 12 Ω (+2/-2) |
Enclosure material | Hybrid Multiplex / Aluminium |
Flying hardware | Integrated |
Dimensions (W x H x D) | 518 x 192 x 390 mm / 20.39 x 7.56 x 15.35″ (518 x 227 x 390 mm / 20.39 x 8.94 x 15.35″ incl. hardware) |
Net weight | 15 kg / 33.07 lbs |