Form follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenFür die Älteren unter uns gehören diese Lautsprecher zu den ersten jugendlichen Audiowunschträumen, wie zum Beispiel das Klipschorn oder die Electro Voice Sentry III. Für alle anderen könnte dieser besondere Lautsprecher eine echte Überraschung werden.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Funktion-One FF4000
Specification | |
Type | DJ Mixer |
Channel Information | 4 Channels. |
Channel 1 switchable to Mic - Line, (mic input Lo Z balanced). | |
Channels 2 - 4 are switchable to either phono/line or line. All inputs have rear panel gain trims to set individual levels. | |
Channels 2 - 4 have a concealed switch to select phono or line input. | |
Front Panel Controls | 1 Illuminated input select push switch with adjacent led indicator. |
1 Gain pot with adjacent clip indicator and 5 segment led meter indicating signal presence. | |
3 band E.Q. featuring +6 dB boost and -25dB cut at HF 10kHz, Mid -1kHz & Bass 100Hz | |
Full routing to crossfader A - B or direct to master from all channels. Illuminated push buttons. | |
Cue switch. | |
Rotary or Linear faders on removable panel along with 45mm VCA controlled crossfader. | |
Master Section | Very comprehensive effects routing and mixing facilities |
Features 2 effects loops A & B with wet/dry mixing controls, punch or latching push switches. | |
Loop Swap facility. Mono switch and bal/pan control. | |
Send and return gain trims to allow correct level matching into any outboard effects processors. | |
Cue switch allows checking of the desired effect before selection. | |
1 switchable insert on the main outputs. | |
Outputs | Master output available in stereo and mono on XLR connectors (balanced) |
Zone output available in stereo and mono on XLR connectors (balanced) | |
Booth Monitors output switchable to mono on XLR connectors (balanced) | |
Record outputs are provided on phono connectors. | |
Console Mic | An input for a separate console microphone (XLR connector Lo Z Balanced) is fitted. This signal is routed to the zone and master outputs but it is not present in the booth outputs. 2 band E.Q. Cue & Mic ON switch also fitted. |
Monitoring | Phones outputs are provided on 3.5mm and standard 6.5mm jack sockets driven by a powerful headphone amplifier. |
Split cue switch and cue mixing control are also featured. | |
2 x 12 segment stereo led meters are fitted to visually monitor Cue and output signals. | |
Construction | Steel Front panel with a rear printed polycarbonate overlay guarantees that the mixer will still look good in years to come. |