390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
462_22882_2
Topthema: Feurig
High-End-Standbox mit ESS AMT
Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Krix MX-5
Ausstattung & technische Daten
| Specification | |
| Type | Cinema Loudspeaker |
| LCR Speaker Modules | |
| Frequency Range | 40Hz-20kHz in room response |
| Power Handling | 100 – 300 Watts RMS recommended amplifier power |
| Sensitivity | 92dB for 2.83 volts at 1 metre |
| Impedance | 8 Ohms |
| Configuration | 2-way |
| Enclosure Type | Bass reflex, front vented |
| Low Frequency Driver | Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion |
| High Frequency Driver | 26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide |
| Input Terminals | Gold plated spring terminals |
| Dimensions | 700mm high x 315mm wide x 190mm deep (2040mm wide including subwoofer modules) |
| Subwoofer Modules | |
| Frequency Range | 30Hz-200Hz in room response |
| Power Handling | 200 – 350* Watts RMS recommended amplifier power |
| * The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers. | |
| Sensitivity | 90dB for 2.83 volts at 1 metre |
| Impedance | 4 Ohms |
| Enclosure Type | Bass reflex, down-firing vent |
| Low Frequency Driver | Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly |
| Input Terminals | High level gold plated spring terminals |
| Dimensions | 700mm high x 540mm wide x 190mm deep (2040mm wide including LCR modules) |
| System Recommendations | |
| Minimum Screen Size 16:9 | 92″ (2037mm x 1146mm) |
| Minimum Screen Size 21:9 | 90″ (2101mm x 900mm) |
