
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahrenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Manley STEREO PULTEC EQP-1A
Features | |
TUBE EQ | |
MANLEY input transformer with nickel laminations potted in mu-metal case. | |
3 kOhm input Z | |
PHASE REVERSE switch for balanced XLR input | |
Alternate transformerless 1/4" HI-Z (5K Ohm) input | |
BYPASS switch & AUTO-MUTE w/warmup delay | |
Silent conductive plastic BOOST & CUT controls | |
Sealed gold-contact Greyhill frequency select switches | |
Balanced Transformer-Coupled XLR Outputs via MANLEY 9611 | |
Flat frequency response from 10Hz-70KHz | |
Specification | |
Vacuum Tubes | 1 x 12AX7WA (gain) and 1 x 6414 (or 5965) White Follower |
Hi-current drive | <50 Ohm LO-Z XLR & 1/4" outputs |
THD @ 1kHz | <0.01% |
S/N Ratio | 116 dB |
Adjustable FEEDBACK / GAIN | Unity ±5 dB |
Max. output | +30 dBv |
Power consumption | 18 watts |
Operating mains voltage | Units are purpose built for original destination countrys mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge. |
Power transformer must be replaced in order to change mains operating voltage. 120VAC units may NOT be rewired to put the primaries of the power transformer in series for 220-240V operation or a large radiated field of hum will develop. | |
If changing locations/voltages, the power transformer must be replaced with the dedicated one for the voltage at which it will operate. | |
Mains Voltage & Frequency | 50~ 60Hz |
Dimensions | 19" x 3 1/2" x 10" (occupies 1u) |
Shipping weight | 12 lbs. |