Wenn eine „Männer-Soundbar“ zur Initialzündung wird: Wir testen das große Besteck von Neuron Acoustics
>> Mehr erfahren>> Alle anzeigen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: QSC WL2102-w
| Specification | |
| Configuration | Biamp or Triamp mode |
| Transducers High Frequency | 1.4-inch exit, 3-inch titanium diaphragm, neodymium magnet assembly |
| Transducers Low Frequency | 2 × 400 W, 16 ohm 10-inch woofer, 3-inch voice coil, ceramic magnet assembly |
| Frequency Response (±3 dB) | 55 Hz to 18 kHz (with recommended DSP processing) |
| Frequency Response (-10 dB) | 48 Hz to 20 kHz (with recommended DSP processing) |
| Nominal Impedance | HF: 16 ohms |
| LF biamp mode: 8 ohms | |
| LF triamp mode: 16 ohms (× 2) | |
| Continuous Power Capacity | HF: 80 W (2 hours, AES1984-2 method, 1 to 10 kHz) |
| LF biamp mode: 600 W (2 hours, AES1984-2 method, 80 to 800 Hz) | |
| LF triamp mode: 400 W (×2) (2 hours, AES1984-2 method, 80 to 800 Hz) | |
| Max Recommended Power | HF: 300 W @ 16Ω |
| LF bi-amp mode: 1400 W @ 8Ω | |
| LF tri-amp mode: 700 W @ 16Ω (x 2) | |
| Sensitivity (1 W at 1 m) | HF: 107.5 dB (single cabinet measured in free space.) |
| LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel) | |
| Maximum Output (SPL at 1 m) Continuous | HF: 127 dB / LF: 127 dB |
| Maximum Output (SPL at 1 m) Peak | HF: 133 dB / LF: 133 dB |
| Maximum Output (dB SPL at 1 m) Continuous / Peak | HF: 126 dB / 132 dB |
| LF: 122 dB / 128 dB | |
| Nominal Coverage | Horizontal: 140° |
| Vertical: Dependent on number of elements used | |
| Cabinet Type | Ported, trapezoidal |
| Material | Baltic birch plywood |
| Finish | Available in standard black finish |
| Grille | Perforated, formed powder coated steel |
| Connectors | 2 × Neutrik Speakon® NL8 in parallel |
| Pinout Bi-amp | 1+/1- LF |
| 2+/2- NC | |
| 3+/3- NC | |
| 4+/4- HF | |
| Pinout Tri-amp | 1+/1- MF |
| 2+/2- LF | |
| 3+/3- NC | |
| 4+/4- HF | |
| Attachment Points | Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2 ° to 10° and 0° |
| Net Weight | 37.7 kg |
| Dimensions (H×W×D) | 273 × 698.5 × 514.3 mm |



