698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
696_24841_2
Topthema: Audio System X-100.9 MDSP-BTA – 9 Kanal Endstufe mit 13 Kanal DSP
Starkes Upgrade
Audio System hat seiner modernsten DSP-Endstufengeneration eine kleine Überarbeitung gegönnt, die in der Praxis einen großen Unterschied macht.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Rupert Neve 542
Ausstattung & technische Daten
| Specification | |
| Type | 500 Series Tape Emulator |
| Line Amp Specifications (Measurements with tape circuit disengaged) | Noise |
| Measured at Main Output, un-weighted, 20Hz-22kHz, Input Terminated 40 Ohms. | |
| Unity Gain Better than -100dBu | |
| Frequency Response | Measured at +10dBu, trim at unity. |
| Main Output +/- 0.25dB from 5Hz to 60Khz -2dB @ 120KHz | |
| Maximum Output Level 23.25dBu | |
| Total Harmonic Distortion and Noise | @ 1kHz, +20dBu output level Better than 0.0025% |
| @ 20Hz, +20dBu output level 0.07% Typical (2nd and 3rd harmonic) | |
| Tape FX Specifications Noise | Measured at Main Output, un-weighted, 20Hz-22kHz, Input Terminated 40 Ohms. |
| Saturation @ minimum Better than -100dBu | |
| Saturation @ maximum Better than -100dBu | |
| Frequency Response | 15 IPS, Input @ -0 dBu -3dBu @ 28kHz |
| Saturation @ minimum 0dBu @ 10Hz | |
| +5dBu Peak @ 60Hz | |
| Saturation @ maximum -3dBu @ 20kHz | |
| -3dBu @ 12.5Hz | |
| +2.4dBu Peak @ 60Hz | |
| 30 IPS, Input @ -0 dBu -3dBu @ 120kHz | |
| Saturation @ minimum -3dBu @ 10Hz +3.15dBu Peak @ 125Hz | |
| Saturation @ maximum -3dBu @ 100kHz | |
| -3dBu @ 12.5Hz | |
| +1.3dBu Peak @ 110Hz | |
| Total Harmonic Distortion and Noise | Refer to sweeps on page10 |
| 15 IPS, Input @ -0 dBu 0.4% @ 3kHz to 1% @ 175Hz typical | |
| Saturation @ minimum Greater than 1% below 175Hz typical | |
| Saturation @ maximum 1% at 6kHz typical | |
| 0.3% @ 1kHz to 3% @ 50Hz typical | |
| 30 IPS, Input @ -0 dBu 1% at 1kHz typical | |
| Saturation @ minimum 0.6% @ 400Hz 5% @ 20Hz typical | |
| Saturation @ maximum 1.5% @ 20kHz to 0.4% @ 1kHz typical | |
| 0.4% @ 1kHz to 2 %@ 50Hz typical | |
| Power requirements | Supplied by 500 series rack with 110-125 mA @ +/- 16V DC |
