
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahrenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Rupert Neve 551
Specification | |
Type | 500 Series Inductor EQ |
Equalizer Bypassed | |
Noise | Measured at Main Output, un-weighted, 22Hz-22kHz, source impedance 40 Ohms balanced. |
Better than -102dBV | |
Frequency Response | Main output, no load |
+/- 0.1dBu from | |
20Hz to 31.5kHz | |
-1dB @ 120kHz | |
Maximum Output Level | 23.25dBu |
Total Harmonic Distortion and Noise | @ 1kHz, +20dBu output level, no load. Better than 0.0025% |
@ 20Hz, +20dBu output level, no load. 0.13% Typical (2nd and 3rd harmonic) | |
High Pass Filter | -2.7dB @ 80Hz |
Slope | 12dB/Octave |
Equalizer Engaged | |
Noise | Measured at Main Output, un-weighted, 22Hz-22kHz, source impedance 40 Ohms balanced. Better than -94dBV |
Better than -94dBV | |
Frequency Response | Main output, no load |
+/- 0.25dBu from 20Hz to 45kHz | |
-2dB @ 120kHz | |
Maximum Output Level | 23dBu |
Total Harmonic Distortion and Noise | @ 1kHz, +20dBu output level, no load. Better than 0.009% |
@ 20Hz, +20dBu output level, no load. 0.13% Typical (2nd and 3rd harmonic) | |
Power Requirements | 120mA on +16VDC |
110ma on -16VDC |