Die Q65H ist die günstigste Soundbar aus TCLs Q-Serie. Sie ist bereits unter 300 Euro erhältlich und leistet dafür erstaunliches.
>> Mehr erfahren>> Alle anzeigen
Die 800er Serie von Philips ist preislich deutlich unter den edlen OLED+ Modellen angesiedelt und erfreut sich daher hoher Beliebtheit. Dennoch bringt das brandneue 2025er Modell OLED810 einen Großteil der Technologie aus der Topserie mit.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VQNET 95MH
| Performance | |
| System Type | 2-Way Mid/High - Point Source |
| Frequency Response (-3 dB) (1) | 400 Hz - 23 kHz |
| Frequency Range (-10 dB) (1) | 350 Hz - 27 kHz |
| Dispersion (-6 dB) | 90 x 50 degrees |
| Driver Complement Mid/High Frequency | Dual Concentric |
| Crossover | 7 kHz (DSP generated) |
| Recommended High Pass | |
| Filter @ 450 Hz (DSP generated) | |
| Directivity Factor (Q) | 11.7 averaged 1 kHz to 10 kHz |
| Directivity Index (DI) | 10.7 averaged 1 kHz to 10 kHz |
| Rated Maximum SPL (2) | Average: 134 dB |
| Peak: 140 dB | |
| Distortion | |
| 110 dB SPL | 2nd Harmonic 500 Hz: 2.347%, 2 kHz: 1.195%, 5 kHz: 1.967% |
| 3rd Harmonic 500 Hz: 0.507%, 2 kHz: 0.048%, 5 kHz: 0.037% | |
| 115 dB SPL | 2nd Harmonic 500 Hz: 4.426%, 2 kHz: 2.179%, 5 kHz: 3.526% |
| 3rd Harmonic 500 Hz: 0.861%, 2 kHz: 0.075%, 5 kHz: 0.120% | |
| 120 dB SPL | 2nd Harmonic 500 Hz: 8.219%, 2 kHz: 3.615%, 5 kHz: 5.507% |
| 3rd Harmonic 500 Hz: 1.951%, 2 kHz: 0.233%, 5 kHz: 0.327% | |
| 125 dB SPL | 2nd Harmonic 500 Hz: 16.287%, 2 kHz: 5.705%, 5 kHz: 7.479% |
| 3rd Harmonic 500 Hz: 8.134%, 2 kHz: 0.487%, 5 kHz: 0.062% | |
| Electronics | |
| Efficiency | >85% typically |
| Damping Factor | 120 ref 8 Ohms |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 5.6 kOhms (unbalanced) 11.2 kOhms (balanced) |
| Output Power (Programme) | 400 W Mid Frequency |
| 200 W High Frequency (limited to) | |
| Input Sensitivity | 1.4 V (+5.5 dBu) |
| System Type | Dual channel Class D |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
| System Type | High current, high frequency switch mode |
| Efficiency | >90% typical |
| Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
| Mains fuse | External |
| Fuse type | T10AT |
| Other features | Automatic soft start |
| Current Draw | 115 V, 230 V |
| Startup (inrush) | 3.5 A, 1.9 A |
| Idle | 1.1 A, 0.56 A |
| Max | 3.5 A, 1.7 A |
| DSP System | |
| Comms Facilities | Firmware updatable and selected parameters editable |
| Communications | Serial - RS485 Proprietary message format |
| Dynamic Range | 112 dB (A) typical |
| DSP | 3rd generation SHARC |
| Sampling Frequency | 96kHz 24 bit A/S-D/A word length |
| Format | 1 IN - 2 OUT |
| Construction | |
| Enclosure | 18 mm (0.71") birch plywood, vented and internally braced |
| Grille | Powder coated perforated steel grille |
| Finish | Textured black or white paint (custom colours on request) |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon 1 x Neutrik Powercon (outlet) |
| Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
| Fittings | 2 x Recessed carrying handles |
| 12 x M10 flying inserts | |
| Dimensions (H x W x D) | 500 x 694 x 515 mm |
| Net Weight (ea) | 39 kg |
|
305-2128
MD Sound GmbH & Co. KG |


