Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenWas tun wenn man in größeren Strukturen eine WLAN-Verbreitung haben möchte? Ganz einfach: Sie können auf den WLAN-Access-Point WaveData von Televes zugreifen.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Chord CPA 5000
Specifications | |
Inputs & Outputs | 8 Stereo Inputs and 1 Stereo Outputs |
4x Stereo Balanced XLR Inputs – Line In 1, Line In 2, Line In 3, and Line In 4 | |
4x Stereo Unbalanced RCA Inputs – Line In 5, Line In 6, Tape 1, Tape 2 | |
1x Stereo Output – Either via Balanced XLR or Unbalanced RCA | |
1x Stereo Balanced XLR AV Bypass Input | |
Frequency Range | 2.5Hz – 200kHz +/- 3dB |
Total Harmonic Distortion | 0.002% 20Hz – 20kHz |
Intermodulation Distortion | -115dB on all inputs |
Signal to Noise Ratio | -120dB on all inputs |
Channel Separation | 20Hz @ 100dB, 1kHz @ 95dB, 10kHz @ 90dB, 20kHz @ 85dB |
Channel Balance | 0.01dB |
Input Max Voltage | 17v RMS Balanced – 8.5v RMS Unbalanced |
Output Max Voltage | 17v RMS Balanced – 8.5v RMS Unbalanced |
Output Offset | 0mV (Both Channels) |
Potentiometer Performance | 0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13seconds Full Travel) |
Nominal Gain | All inputs subject to six levels of switchable gain – x0.5, x1, x1.5, x2, x2.5, and x3 |
Input Impedance | 100 kΩ Balanced – 50 kΩ Unbalanced |
Output Impedance | 100Ω (Short Circuit Protected) |
Operating Voltage | 85v – 270v AC (50Hz – 60Hz) Auto Switching |
Power Consumption | 30w |
Dimensions Without Integra Legs | 420mm (w) x 355mm (d) x 133mm (h) |
Dimensions With Included Integra Legs | 480mm (w) x 355mm (d) x 173mm (h) |
Weight | 18kG |
34-2212
LINE High-Fidelity |