618_24548_2
Topthema: Noise-Cancelling-Kopfhörer · Beyerdynamic Aventho 200
Ein angenehmer Geselle
Der moderne Mensch hört Musik am liebsten mobil. Der neue Beyerdynamic Aventho 200 spricht mit seiner exzellenten Ausstattung und seinem überzeugenden Klang genau diese Menschen an.
>> Mehr erfahren>> Alle anzeigen
615_24536_2
Topthema: Aktiv-Standlautsprecher · Loutd musegg
Kaufen oder leihen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Vorverstärker
Ausstattungsliste: Goldmund MIMESIS 22H NEXTGEN
Ausstattung & technische Daten
| OUTPUT LEVEL | |
| Nominal level: 1.55 V RMS. | |
| Maximum output level (balanced) : 9.6 V RMS. | |
| Maximum output level (unbalanced): 4.8 V RMS. | |
| Output impedance: 50 Ohms. | |
| FREQUENCY RESPONSE | |
| These values from any level to 10 V RMS: | |
| +/- 0 dB, 20 Hz to 20 kHz. | |
| +/- 3 dB, 0.2 to 1.2 MHz. | |
| INPUT SENSITIVITY | |
| Nominal level: 100 mV. | |
| Saturation level: 5 V RMS. | |
| Nominal input impedance: 39 kOhms. | |
| Separated input level adjustment for each of the 7 line inputs: -12 to 12 dB. | |
| INPUT LEVEL | |
| Maximum input level (balanced) : 9.6 V RMS. | |
| Maximum input level (unbalanced): 4.8 V RMS | |
| GROUP DELAY | |
| Propagation delay <300 ns stable with frequency from DC to 200 kHz. | |
| DISTORTION | |
| 1 Vrms output level, 80 KHz measurement bandwidth. | |
| 600 ohms termination impedance. | |
| THD unbalanced input to unbalanced output 0.0002 % flat with frequency. | |
| THD balanced input to balanced output 0.0001 % flat with frequency. | |
| IMD unbalanced input to unbalanced output 0.0002 %. | |
| IMD balanced input to balanced output 0.0001 %. | |
| SPEED | |
| Slew rate of the amplification stages: 2500 V/us. | |
| Rise time: < 400 ns. | |
| CROSSTALK | |
| Separation: > 105 dB between channels. | |
| (20 Hz – 20 kHz). | |
| NOISE | |
| Signal-to noise ratio on line input: > 120 dB (0.01 Hz – 10 MHz). | |
| Weighted ASA A: > 130 dB. | |
| POWER | |
| Nominal line voltage: 115 V or 230 V. | |
| Input voltage range: +/- 15 %. | |
| Maximum power consumption: 70 W. | |
| GROUNDING | |
| Separated ground and earth signal. | |
| Connection optional between earth and ground to cancel all ground loops. | |
| SAFETY FEATURES | |
| Automatic switching to MUTING if the AC line drops or is interrupted. | |
| Automatic protection against tape loops. | |
| FRONT PANEL | |
| MUTING/POWER switch control. | |
| VOLUME control. | |
| BALANCE control. | |
| RECORD/MENU switch. | |
| PHASE/EDIT switch. | |
| 7 INPUT CONTROL switches. | |
| REAR PANEL | |
| Power connector. | |
| Earthing post (yellow-green). | |
| Output connectors XLR (right and left) balanced. | |
| Output connectors RCA (right and left) for Tape and Line outputs. | |
| Signal grounding post (black). | |
| Input connectors XLR (right and left) balanced. | |
| Input connectors RCA (right and left) for Tape and line inputs. | |
| Link float. | |
| RS232 Connector. | |
| POWER SUPPLY CONTROLS | |
| Main fuse (2.5 A slow-blow). | |
| SIZE & WEIGHT PREAMPLIFIER | |
| 44 W x 16.5 H x 40 D (cm) – 17.3 W x 6.3 H x 15.8 D (inch). | |
| 20 kg. | |
| SIZE & WEIGHT POWER SUPPLY | |
| 44 W x 16.5 H x 37.5 D (cm) – 17.3 W x 6.3 H x 14.6 D (inch). | |
| 25 kg. | |
