Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Luxman L-590AXII
Specification | |
Rated Output | 30W + 30W (8Ω) |
60W + 60W (4Ω) | |
Input sensitivity/input impedance | PHONO (MM): 2.5mV/47kΩ |
PHONO (MC): 0.3mV/100Ω | |
LINE: 180mV/47kΩ | |
BAL.LINE: 180mV/55kΩ | |
MAIN-IN: 550mV/47kΩ | |
Output voltage | RECOUT: 180mV |
PRE OUT: 1V | |
Frequency response | PHONO: 20Hz to 20kHz (±0.5dB) |
LINE: 20Hz to 100kHz (+0, ±3.0dB) | |
Total Harmonic Distortion | 0.005% or less (8Ω, 1kHz) |
0.02% or less (8Ω, 20Hz to 20kHz) | |
S/N ratio (IHF-A) | PHONO (MM): 91dB or more |
PHONO (MC): 75dB or more | |
LINE: 107dB or more | |
Volume adjustment | New LECUA1000 |
Amplification circuit | ODNF 4.0 |
Output configuration | Bipolar 3-parallel push-pull |
Damping factor | 320 |
Max. amount of tone control | BASS: ±8dB at 100Hz |
TREBLE: ±8dB at 10kHz | |
Power supply | 230V~(50Hz) / 115V~(60Hz) |
Power consumption | 330W |
260W (under no signal), 0.5W (at standby) | |
External dimensions | 440(W) x 193(H) x 463(D) mm |
front side knob of 20mm and rear side terminal of 37mm included in depth | |
Net weight | 28.4kg (main unit) |
Accessories | Remote controller (RA-17A) Power cable |
Speaker terminal Supported Y-lug terminal dimension | Width of part a: 16mm or less |
Width of part b: 7mm or more | |
Connection may not be performed depending on the shape of the Y-lug terminal. |