Kenwoods brandneue Multimedia-Headunit bringt nicht nur einen riesigen 10,1-Zoll-Bildschirm mit, sondern auch eine speziell auf Wohnmobile zugeschnittene Navigation.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Pathos Acoustics InPol Heritage
Specification | |
Type | Reference stereo integrated amplifier Pure class A - double INPOL technology - fully balanced- digital Bias/gain set technology |
Tubes | 2 x ECC803S tung-sol |
2 X 6H30 Sovtek | |
Output power | 2 x 80W@ 8 Ohm |
Frequency response | 2Hz – 200KHz ± 0.5db |
Max input voltage | 10VRMS |
Input sensitivity | 780mVRMS |
Input impedance | 20KOhm |
Volume regulator | purely resistive relays |
THD | 0,1% @ 80W |
S/N Ratio | > 100dB |
Gain | 33 db Unbalanced |
39 db Balanced | |
Connections | |
Analog inputs | 2 balanced XRL line |
4 unbalanced RCA line | |
Digital inputs | Installation of optional HiDac Mk2 board is required to enable these inputs |
1 USB port type “B” | |
1 SPDIF coaxial | |
1 SPDIF optical | |
Outputs | 1 Pre out stereo line Unbalanced RCA |
1 Pre out stereo line Balanced XLR | |
Output gain selectable in 4 positions | |
Pre-output phase can be selected | |
Dimensions | 555mm (D) X 450 (W) X 230mm (H) |
Net Weight | 58Kg |