Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Wireless Aktivlautsprecher
Ausstattungsliste: Audioengine A1
General specifications | |
Amplifier type | Dual class D |
Power output | 60W peak power total (15W RMS / 30W peak per channel), AES |
Drivers | 2.75″ aramid fiber woofers, 3/4″ silk dome tweeters |
Inputs | 3.5mm stereo mini-jack, Bluetooth |
Outputs | LFE Variable line-out for subwoofer |
Input voltages | 100-240V 50/60Hz auto-switching |
SNR | >95dB (typical A-weighted) |
Frequency response | 65Hz-22kHz ±2.0dB |
Weight (both speakers) | 6.7 lbs |
Dimensions, each speaker (HWD) | 6″ x 4″ x 5.25″ |
Bluetooth specifications | |
Bluetooth receiver type | Bluetooth 5.0 |
Supported codecs | aptX, AAC, SBC |
Wireless operation range | Up to 100ft (30m) typical |
Input bit depth | up to 16 bits native |
Input sample rate | up to 48KHz native |
Input data rate | Determined by Bluetooth |
Wireless latency | ~30 milliseconds (ms) |