Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: AV-Endstufen
Ausstattungsliste: Classé CA-5300
| Specifications | |
| Frequency response | 1 Hz – 100 kHz, -3dB |
| Output power | 300W rms into 8Ω (24.8 dBW) |
| All channels driven | |
| Harmonic Distortion | <0.002% at 1 kHz balanced |
| <0.004% at 1 kHz single ended | |
| Peak Output Voltage | 167V peak to peak, 53V rms no load |
| 156V peak to peak, 48V rms into 8Ω | |
| Input Impedance | 50kΩ balanced / single ended |
| Voltage gain | 29dB balanced / single ended |
| Input level at clipping | 2.1V rms balanced / single ended |
| Intermodulation Distortion | >90dB below fundamental into |
| >90dB below fundamental into | |
| 8Ω balanced / single ended | |
| Signal to Noise Ratio | -116dB at peak output into 8Ω |
| Measurement Bandwidth: 22 kHz | |
| Output impedance | 0.03Ω @ 1 kHz |
| Standby power consumption | < 1W |
| Rated power consumption | 1300W @ 1/8th power into 8Ω |
| Width | 17.5” (444mm) |
| Depth | 22.52” (572mm) (excluding connectors) |
| Height | 8.78” (223mm) |
| Gross weight | 115 lb (52.3 kg) |
| Net weight | 105 lb (47.7 kg) |
| Mains voltage | Specified on rear panel |


