562_24275_2
Topthema: OLED-TV · Philips 55OLED810
Adaptive Intelligenz
Die 800er Serie von Philips ist preislich deutlich unter den edlen OLED+ Modellen angesiedelt und erfreut sich daher hoher Beliebtheit. Dennoch bringt das brandneue 2025er Modell OLED810 einen Großteil der Technologie aus der Topserie mit.
>> Mehr erfahren>> Alle anzeigen
589_24182_2
Topthema: Revox Studiomaster A200
Musik ist Geschmacksache, Klang nicht
So lautet der Slogan der Firma Revox. Eine Marke, die man wie wenige andere mit der Kombination aus Technik und Design verbindet. Die Studiomaster A200 ist dafür ein schönes Beispiel.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICS8T
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) polypropylene w/rubber surround, steel basket, & phase plug |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 60W or 120W at 70V; 120W at 100V |
| Low-Pass Filter | 125 Hz, 2nd order |
| Frequency Response | 45 Hz to 125 Hz (±3 dB) |
| Frequency Range | 35 Hz to 125 Hz (-10 dB) |
| Power Handling | 100 Watts program (8 Ohms) |
| Sensitivity | 90 dB @ 1W/1m |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, 1/2” or 3/4” conduit knockout top and side, (1) cable clamp included |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 8.9 in (226 mm) minimum mounting depth, 11.2 in (285 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.07 in (307 mm) not including toggles |
| Depth | 9.10 in (231 mm) |
| Weight | 14.0 lb (6.4 kg) |
