390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
501_17398_1
Anzeige
Topthema: Norddeutsche HiFi-Tage
2025 im Hotel Le Méridian Hamburg direkt an der Alster
Die Norddeutschen HiFi-Tage finden 2025 im Hotel Le Méridian Hamburg direkt an der Alster statt. Am 01.02.2025, von 10–18 Uhr und am 02.02.2025, von 10–16 Uhr können Interessierte bei freiem Eintritt durch die Vorführungen und Showrooms schlendern.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 503DC
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 85 Hz - 50 kHz |
| Frequency Range (-10 dB) (1) BM backcan model | 74 Hz - 54 kHz |
| Frequency Range (-10dB) (1) PI fitted with backcan | 70 Hz - 54 kHz |
| System Sensitivity (1W @ 1m) (2) | 89 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling (3) | Average: 60 W |
| Programme: 120 W | |
| Peak: 240 W | |
| Recommended Amplifier Power | 120 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 107 dB |
| Peak: 113 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / 3.75 W (1320 O) / OFF & low impedance operation |
| 100 V: 30 W (330 O) / 15 W (660 O) / 7.5 W (1320 O) / OFF & low impedance operation | |
| TRANSDUCERS | |
| Dual Concentric point source driver | 1 x 130 mm (5.0”) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 35 mm (1.38”) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 20 mm (0.79”) PEI dome |
| PHYSICAL | |
| Enclosure | Backcan: Zinc plated steel |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Pre Install (PI) | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Dimensions | |
| Bezel Diameter | 205.9 mm (8.11”) |
| BM Model: Front of ceiling to rear of backcan | 188.0 mm (7.40”) |
| BM Model: Front of ceiling to top of safety loop | 205.3 mm (8.08”) |
| PI Model: Front of ceiling surface to rear of speaker unit | 133.3 mm (5.25”) |
| PI Model: Front of accessory backcan bezel to top of safety loop | 153.5 mm (6.04”) |
| Hole cutout diameter (all models) | 190 mm (7.48”) |
| Net Weight (ea) | CMS 503DC BM: 4.10 kg (9.04 lbs) |
| CMS 503DC PI: 3.1 kg (6.83 lbs) | |
| CMS 503 PI Backcan: 2.6 kg (5.73 lbs) | |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Packed Quantity | 2 |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
