Die Q65H ist die günstigste Soundbar aus TCLs Q-Serie. Sie ist bereits unter 300 Euro erhältlich und leistet dafür erstaunliches.
>> Mehr erfahren>> Alle anzeigen
Zwischen dem 08. Dezember 2025 und dem 07. Januar 2026 bietet der Hersteller aus Schwäbisch Gmünd eine 0%-Finanzierung für Einkäufe zwischen 200 und 8.000 Euro an.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 603ICT
| Specification | |
| SYSTEM | |
| Frequency Response (-3 dB) (1) BM Backcan | 51 Hz - 24 kHz |
| Frequency Range (-10 dB) (1) BM backcan model | 74 Hz - 24 kHz |
| Frequency Range (-10dB) (1) PI fitted with backcan | 46 Hz - 24 kHz |
| System Sensitivity (1W @ 1m) (2) | 91 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1 kHz to 6 kHz) | 105 degrees |
| Directivity Factor (Q) | 7.1 averaged 1 kHz to 6 kHz |
| Directivity Index (DI) | 7.9 averaged 1 kHz to 6 kHz |
| Power Handling (3) | Average: 60 W |
| Programme: 120 W | |
| Peak: 240 W | |
| Recommended Amplifier Power | 120 W @ 16 ohms |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Rated Maximum SPL | Average: 109 dB |
| Peak: 115 dB | |
| Transformer Taps (via front rotary switch) | 70 V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation |
| 100 V:60 W (83 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation | |
| Crossover | 7 kHz inductively coupled |
| TRANSDUCERS | |
| Low Frequency | 165 mm (6.50”) mineral loaded polypropylene |
| High Frequency | ICT aluminium dome |
| PHYSICAL | |
| Enclosure | Backcan: Zinc plated steel |
| Baffle: Reflex loaded UL 94V-0 rated ABS | |
| Grille: Steel, with weather resistant coating | |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp |
| Blind Mount (BM) | Complete with fixed backcan |
| Pre Install (PI) | Separate backcan for pre-installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Conduit Knockouts on PI Backcan | 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with “loop through” facility |
| Compliance | UL-1480, UL-2043, CE |
| Dimensions | |
| Bezel Diameter | 274.0 mm (10.79") |
| BM Model: Front of ceiling to rear of backcan | 256.5 mm (10.10") |
| BM Model: Front of ceiling to top of safety loop | 273.8 mm (10.78") |
| PI Model: Front of ceiling surface to rear of speaker unit | 100.0 mm (3.94") |
| PI Model: Front of accessory backcan bezel to top of safety loop | 168.5 mm (6.60") |
| Hole cutout diameter (all models) | 253 mm (9.96”) |
| Net Weight (ea) | CMS 603ICT BM 5.41 kg (11.93 lbs) |
| CMS 603ICT PI 2.64 kg (5.82 lbs) | |
| PI Backcan 3.68 kg (8.11 lbs) | |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (Mud) ring |
| Arco Grille | |
| Packed Quantity | 2 |
|
305-2128
MD Sound GmbH & Co. KG |



