Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CMX ACS-800
Specification | |
Description | 8 Channel Amplifier Fault Changeover with Speaker Line Surveillance |
Connector | Eight balanced line inputs by phoenix connector |
Eight balanced line outputs with 24V relay by phoenix connector | |
Eight Amplifier 100V inputs by phoenix connector | |
Eight Speaker 100V outputs by phoenix connector | |
One fault contact output by phoenix connector & One RS485 output by RJ45 | |
Configuration | Auto or manual monitoring dipswitch; Enable or disabled 8 zone monitoring dipswitch Expandable to 192 zones ID dipswitch; 10% or 20% monitoring speaker line fluctuation |
Input Sensitivity/Impedance | 1V, 10K Ohm |
Pilot Tone Frequency | 20 KHz (±5%) |
Detection Line | 50V/70V/100V Speaker line |
Detection Level | 50V rms min |
Amplifier Detection Time | < 1 Second |
Speaker Line Detection Time | < 2 Seconds per speaker zone |
Changeover Time | < 1 Second |
Failure Detection Time | 5-15 Seconds |
Failure Reset Time | 20 Seconds Max. |
Zone Loading Capacity | 500W /100V Line Max. |
Max Loading Current | 8A |
Measurement Sensitivity | ±10% of Speaker line impedance |
Power Supply | DC24V by phoenix connector Max. 2A |
Dimension | 482(W)x420(D)x44(H) mm |
Weight | 3.2kg |