Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenVon Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CMX DSP480
Specification | |
Description | Digital Audio Processor |
Analog Input | 4×XLR balanced, >10k Ohm |
Analog Output | 8×XLR balanced, 50 Ohm |
THD+N | 0.002% at 1kHz 0dBu |
S/N Ratio | <100dBA |
Frequency Response | 20-30kHz; -0.5dBu at 20Hz and 20kHz |
AD/DA Converter | 24 bit-48kHz |
DSP Gain | From -40dBu up to +15dBu by 0.1dBu resolution steps |
PEQ | 8 PEQ per channel |
PEQ Type | Hi/Lo-Shelving, HP/LP, Band Pass, Notch and All Pass filters |
PEQ Gain | From -30dBu up to +15dBu by 0.1dBu resolution steps |
Filter Type | Butterworth, Bessel, Linkwitz Riley |
Filter Slope | From 12dBu up to +48dBu per octave |
PEQ Frequency | 0.05-3 Octaves (Q=0.404-28.852) |
Crossover Filter | HP/LP per output channel |
Input RMS Compressor | Threshold from -20dBu to+20dBu and Byp Attack time from 0.3 ms to200ms; Release time from 0.3 sec up to 3 sec |
Output Peak Limiter | Threshold from -20dBu to+20dBu and Byp Attack time from 1 ms to 900ms; Release time from 0.3 sec up to 5 sec |
Input & Output Polarity | Normal 0° or inverted 180° |
Input & Output Mute | ON/OFF |
Delay | 0-1,000ms per input and output channel |
Presets | 24 user presets |
Connector | 4×XLR inputs, 8×XLR outputs, USB on front panel, RS232 of 9PIN on rear panel |
Power Supply | AC 90V-240V, 50-60Hz |
Dimensions | 484×44×222mm, 1RU |
Weight | 4Kg |