502_23688_2
Topthema: Himmlisches Team
Dynaudio Contour 20i, MOON Audio 250i V2
Unser Hobby spiegelt die Welt da draußen wider: immer mehr, immer größer, immer teurer muss es sein. Zum Glück gibt es aber auch Gegenbeispiele. Mit dem dänischkanadischen Traumduo kann man seinen irdischen Musikfrieden finden.
>> Mehr erfahren>> Alle anzeigen
504_0_3
Anzeige
Topthema: 0-%-Finanzierung bei Nubert
Bis zum 6. Januar 2025 Lautsprecher zinslos finanzieren
Fast so traditionell wie der Adventskranz in der Vorweihnachtszeit ist die Null-Prozent-Finanzierungsaktion im Dezember bei www.nubert.de, mit der sich lang gehegte Wünsche unkompliziert erfüllen lassen. Die Aktion läuft bis zum 6. Januar.
>> www.nubert.de/sale/>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: CODA Audio LINUS10-C
Ausstattung & technische Daten
| Specification | |
| Type | 4 Channel DSP Amplifier with Loudspeaker Management |
| General | |
| Number of output channels | 4 |
| Output stage | Class D |
| Internal samplerate / bit-depth | 96 kHz / 24 bit |
| Output-to-noise ratio (22 Hz – 20 kHz, 4 Ω – analogue input) | >112 dB (unweighted) |
| >115 dB (A-weighted) | |
| Signal-to-noice ratio (22 Hz – 20 kHz, 4 Ω – digital input) | >114 dB (unweighted) |
| >117 dB (A-weighted) | |
| Frequency response (8 Ω load with CLEAR preset) | 20 Hz – 20 kHz = (+0.5 dB /-1.0 dB) |
| THD+N & IMD (4 Ω load @ 1/2 output power) | 20 Hz – 17 kHz = < 0.01% |
| Latency (input to loudspeaker output) | Minimum 2.70 ms AES/EBU input |
| Minimum 2.00 ms analogue input | |
| Protection circuits | Inrush current limiter Thermal limiter Output DC SMPS over-current Output overload |
| LED indicators | Mute status Limit 0 dB Signal Protection Ethernet control active Digital signal locked Power on |
| Ethernet connection | 1 x 10 Mbps RJ45 |
| AC Mains | |
| AC mains input connector | Neutrik 32A powerCON® |
| AC mains input voltage** (230 V internal jumper setting) | 180 V = Minimum |
| 230 V = Nominal | |
| 264 V = Maximum | |
| AC mains input voltage** (115 V internal jumper setting) | 85 V = Minimum |
| 115 V = Nominal | |
| 132 V = Maximum | |
| AC mains frequency | 47 – 63 Hz |
| Power consumption (1/4 power = 600 W @ 4 Ω to represent typical music signal) | Amplifier in standby = 47 W |
| Amplifier idle = 249 W | |
| Amplifier ¼ power = 3146 W | |
| Input | |
| Input sources | Analogue & AES/EBU |
| Analogue input impedance (balanced) | 30 kΩ |
| Maximum input level (analogue differential) | +15 dBu / 4.36 Vrms |
| Input connections | 4x XLR3 Analogue IN |
| 1x RJ45 Analogue IN (4x CH) | |
| 1X RJ45 Analogue LINK (4x CH) | |
| 1x RJ45 Digital IN (4x CH) | |
| 1x RJ45 Digital LINK (4x CH) | |
| Supported digital input formats (internal SRC) | 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz |
| Output | |
| RMS output power (20 Hz – 20 kHz, THD <0.1%) (all channels driven) | 1400 W @ 8 Ω |
| 2500 W @ 4 Ω | |
| 3100 W @ 2.7 Ω | |
| 3700 W @ 2 Ω | |
| Peak output power (20 Hz – 20 kHz, 6 dB Crest Factor) (all channels driven) | 3200 W pk @ 8 Ω |
| 5200 W pk @ 4 Ω | |
| 5800 W pk @ 2.7 Ω | |
| 5000 W pk @ 2 Ω | |
| Maximum output voltage | +/- 170 V pk |
| Maximum output current | +/- 52 A pk |
| Damping Factor (8 Ω load, 1 kHz & below) | > 800 |
| Minimum output load | 2 Ω nom |
| Power output connections | 2x Neutrik NL4 speakON® |
| 1x Neutrik NL8 speakON® | |
| Thermal | |
| Operating temperature | +5°C to +55°C |
| 41°F to 131°F | |
| Thermal output (BTU/h) | 696.08 = Idle |
| 1910.80 = 20 % | |
| 3739.71 = 50 % | |
| 6776.51 = 100 % | |
| Thermal output (kWh) | 0.204 = Idle |
| 0.560 = 20 % | |
| 1.096 = 50 % | |
| 1.986 = 100 % | |
| Cooling | 2x thermally controlled fans |
| Hot air expelled at rear | |
| Physical | |
| Dimensions (WxHxD) | 483.5 x 88 x 454.18 mm / 19.04” x 3.46” x 17.88” (2 Rack units) |
| Net Weight | 14.3 kg / 31.5 lbs |
