Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: PROEL DB2A
| Specification | |
| Type | Active 2-channel D.I. BOX |
| Input Section | |
| 200K Ohm (pad at 0 dB) | |
| 47k Ohm (pad at -20 dB) | |
| 47k Ohm (pad at -40 dB) | |
| Max Input Level | +5 dBu (pad at 0 dB) |
| +25 dBu (pad at -20 dB) | |
| +35 dBu (pad at -30 dB) | |
| Connectors | 2 x 1/4" jack + 1 x RCA (unbalanced) |
| Output Section | |
| Output | Active discrete devices (transformer less) |
| Max. Output Level | into 600 Ohms or greater |
| +5 dBu (for 0.1% THD at 50 Hz) | |
| +5 dBu (for 0.1% THD at 1k Hz) | |
| Connector | XLR-M |
| System Performance | |
| Insertion loss | < 1 dB |
| CMR | > 50 dB |
| Phase distortion | +20° at 20 Hz, -30° at 20k Hz |
| Distortion (THD 20-20k Hz 0dBu) | < 0.007 % |
| Noise | < -105 dBu unweighted |
| Frequency Response | 10 Hz to 40 kHz, +0dB/-1 dB |
| General | |
| Controls | On/off, Pad -20, Pad -30, Gnd Lift. |
| Indicators | On |
| Phantom Power | +24 volts DC to +48 volts DC |
| AC/DC adaptor | +9 volts DC |
| Standalone/Standby | 9 volt PP3 type battery |
| Current consumption | less than 8 mA |
| Dimensions (WxHxD) | 215 x 50 x 125 mm |
| Weight | 1.06 kg (2.34 lb) |





