Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: RME M-1610 Pro
Spezifikation | |
16 Kanal A/D, 8 Kanal D/A Wandler mit ADAT, AVB, MADI | |
16 x Analog In (25-pin D-sub, up to +24 dBu, 6x TRS, fully symmetrical design) | |
8 x Analog Out (25-pin D-sub, up to +24 dBu, fully symmetrical design) | |
16-channel AD converter, 8-channel DA converter, fully symmetrical | |
Switchable sensitivity per channel +13/+19/+24 dBu | |
DC-coupled Outputs | |
1x Stereo Phones out with direct monitoring of all digital and analog inputs | |
4x ADAT Outputs | |
Word Clock I/O (BNC) | |
1 x MADI I/O coaxial | |
Easy single- or multi mode MADI integration via SFP module | |
MADI Auto-Input - seamless redundancy | |
MADI-AVB conversion | |
2 x RJ45 1 GigE AVB, eight streams (128 Channels) with 1-8/12/16 Ch., fully redundant | |
2 x monitored fully redundant internal PSUs | |
19” enclosure 1 height unit | |
SteadyClock FS - ultra-low jitter digital clock technology | |
SyncCheck® and ICC® - detects when a clock source is not in sync and falls back to other available signals | |
2” full color display with control knob for device control | |
Internal routing of all 272x298 channels | |
Remote control via HTTP, JSON, IEEE 1722.1 AVDECC | |
USB 2.0 (for remote control and firmware updates) |