Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Lexicon DD-8+
| Highlights | |
| 8-Channel Network Amplifier | |
| Multi-patented DriveCore™ amplifier technology | |
| 8 X 125W into 8-ohms, all channels driven | |
| Matrix routing – assigns any and all input sources to any or all outputs | |
| 10 analog (5 stereo) and 4 stereo digital inputs | |
| 24-bit/192kHz High-Resolution audiophile DAC | |
| Built-in digital signal processor (DSP) accessible via Ethernet-connected computer | |
| Independent channel output level, bass, treble, variable HP and LP filters | |
| Signal Sensing channel inputs & 5- 15V Trigger Control | |
| High-efficiency, quiet convection-cooled design | |
| Compatible with IP control/automation systems by Crestron, AMX, Control 4 and more | |
| Ten-band parametric equalizer with pink noise generator | |
| HARMAN GreenEdge™ energy compliance | |
| Front panel standby power switch with indicator LED | |
| Front panel channel status indicator LED’s | |
| Short-circuit and thermal protection circuitry | |
| Feedback and protection circuits | |
| Lightweight 1U chassis (rack ears included) | |
| Optional shelf mounting (feet included) | |
| Specification | |
| Communication and Control | IP control through web browser and 3rd party IP control systems |
| Output Power | 125W RMS per channel into 8 ohms from 20Hz – 20kHz |
| Frequency Response | 20Hz - 20kHz +0dB/–1.5dB |
| Total Harmonic Distortion (THD) | Less than 0.05% at full rated power 20Hz - 20kHz |
| Signal-to-Noise Ratio | < –105dB below rated full power A-weighted |
| Crosstalk | < –70dB @ 1kHz |
| Input Sensitivity | 1.12 volts for 125W out into 8 ohms |
| Gain | 29dB |
| Input Impedance | 100K ohms typical |
| Trigger Input | 5V minimum – 15V maximum DC |
| Dimensions (H X W X D) | 2.1" (w/ feet) / 1.7" (w/out feet) x 17.3" x 14.9", 5.4 cm (w/ feet) / 4.5cm (w/out feet) x 43.8 cm x 37.8 cm |
| Weight | 9.2 lbs (4.2 kg) |
| Power Requirements | 100 - 240VAC, 50/60Hz |





