589_24182_2
Topthema: Revox Studiomaster A200
Musik ist Geschmacksache, Klang nicht
So lautet der Slogan der Firma Revox. Eine Marke, die man wie wenige andere mit der Kombination aus Technik und Design verbindet. Die Studiomaster A200 ist dafür ein schönes Beispiel.
>> Mehr erfahren>> Alle anzeigen
593_24436_2
Topthema: Over-Ear-Kopfhörer · Beyerdynamic DT 270 Pro
Purist mit Profi-Sound
Reduzieren auf das Wesentliche: Mit dem DT 270 Pro schafft es Beyerdynamic, die vorzügliche Qualität der großen Studiokopfhörer in ein deutliches leichteres Design zu packen.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VQNET 64DF
Ausstattung & technische Daten
| Performance | |
| System Type | 2-Way Mid/High - Point Source |
| Frequency Response (-3 dB) (1) | 400 Hz - 23 kHz |
| Frequency Range (-10 dB) (1) | 350 Hz - 27 kHz |
| Dispersion (-6 dB) | 60 x 40 degrees |
| Driver Complement Mid/High Frequency | Dual Concentric |
| Crossover | 7 kHz (DSP generated) |
| Recommended High Pass | |
| Filter @ 450 Hz (DSP generated) | |
| Directivity Factor (Q) | 19.3 averaged 1 kHz to 10 kHz |
| Directivity Index (DI) | 12.9 averaged 1 kHz to 10 kHz |
| Rated Maximum SPL (2) | Average: 137 dB |
| Peak: 143 dB | |
| Distortion | |
| 110 dB SPL | 2nd Harmonic 500 Hz: 1.793%, 2 kHz: 0.878%, 5 kHz: 1.191% |
| 3rd Harmonic 500 Hz: 0.477%, 2 kHz: 0.048%, 5 kHz: 0.004% | |
| 115 dB SPL | 2nd Harmonic 500 Hz: 3.172%, 2 kHz: 1.569%, 5 kHz: 2.082% |
| 3rd Harmonic 500 Hz: 0.755%, 2 kHz: 0.044%, 5 kHz: 0.137% | |
| 120 dB SPL | 2nd Harmonic 500 Hz: 5.940%, 2 kHz: 2.716%, 5 kHz: 3.624% |
| 3rd Harmonic 500 Hz: 1.289%, 2 kHz: 0.157%, 5 kHz: 0.446% | |
| 125 dB SPL | 2nd Harmonic 500 Hz: 11.102%, 2 kHz: 4.348%, 5 kHz: 6.709% |
| 3rd Harmonic 500 Hz: 3.667%, 2 kHz: 0.408%, 5 kHz: 1.637% | |
| Electronics | |
| Efficiency | >85% typically |
| Damping Factor | 120 ref 8 Ohms |
| Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
| Input Impedance | 5.6 kOhms (unbalanced)11.2 kOhms (balanced) |
| Output Power (Programme) | 400 W Mid Frequency |
| 200 W High Frequency (limited to) | |
| Input Sensitivity | 1.4 V (+5.5 dBu) |
| System Type | Dual channel Class D |
| PSU Specifications | |
| Input Connector | Locking Neutrik Powercon |
| Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
| System Type | High current, high frequency switch mode |
| Efficiency | >90% typical |
| Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
| Mains fuse | External |
| Fuse type | T10AT |
| Other features | Automatic soft start |
| Current Draw | 115 V, 230 V |
| Startup (inrush) | 3.5 A, 1.9 A |
| Idle | 1.1 A, 0.56 A |
| Max | 3.5 A, 1.7 A |
| DSP System | |
| Comms Facilities | Firmware updatable and selected parameters editable |
| Communications | Serial - RS485 Proprietary message format |
| Dynamic Range | 112 dB (A) typical |
| DSP | 3rd generation SHARC |
| Sampling Frequency | 96kHz 24 bit A/S-D/A word length |
| Format | 1 IN - 2 OUT |
| Construction | |
| Enclosure | 18 mm (0.71") birch plywood, vented and internally braced |
| Grille | Powder coated perforated steel grille |
| Finish | Textured black or white paint (custom colours on request) |
| Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon 1 x Neutrik Powercon (outlet) |
| Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
| Fittings | 2 x Recessed carrying handles |
| 11 x M10 flying inserts | |
| Dimensions (H x W x D) | 500 x 694 x 515 mm |
| Net Weight (ea) | 32.5 kg |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
