698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
699_24856_2
Topthema: Standlautsprecher · Neuron Acoustic Trivion
1825 Tage Musik
Zu den spannendsten Newcomern im Bereich Lautsprecher zählt ganz klar Neuron Acoustic. Was wir bisher aus Heilbronn gehört haben, hat uns restlos begeistert.
>> Mehr erfahren>> Alle anzeigenKategorie: Tonabnehmer
Ausstattungsliste: Lyra Etna
Ausstattung & technische Daten
| Specifications | |
| Type | Medium weight, medium compliance, low-impedance moving coil cartridge |
| Stylus | Lyra-designed long-footprint variable-radius line-contact nude diamond (3um?70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted |
| Cantilever system | Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system |
| Coils | 2-layer deep, 6 N high-purity copper, chemically-purified high purity iron X-shaped former, 4.2 ohm self impedance, 11uH inductance |
| Output voltage | 0.56 mV@5 cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results) |
| Frequency range | 10 Hz-50 kHz |
| Channel separation | 35 dB or better at 1 kHz |
| Compliance | Approx. 12 X10 cm/dyne at 100 Hz |
| Vertical tracking angle | 20 degrees |
| Cartridge body | Multi-material (titanium, duralumin, bronze, stainless steel) self-clamping construction with reduced-surface higher-pressure headshell contact area, predominately non-parallel shaping, phase-interference resonance-controlling mechanisms, body threaded for |
| Cartridge mounting screws | 2.6 mm 0.45 pitch JIS standard |
| Cartridge weight (without stylus cover) | 9.2g |
| Distance from mounting holes to stylus tip | 9.52mm |
| Recommended tracking force | 1.68-1.78g (1.72 g recommended) |
| Recommended load directly into MC phono input | 104 ohm-887ohm (determine by listening, or follow detailed guidelines in owner |
| Recommended load via step-up transformer | 5-15 ohm (connect step-up transformer |
| Recommended tonearm | High-quality pivoted or linear (tangential) tonearm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment |
Top Händler
|
106-2399
HiFi Gogler | Oliver Gogler e.K. |
