Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Tonabnehmer

Ausstattungsliste: Lyra Etna

Ausstattung & technische Daten
Type Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus Lyra-designed long-footprint variable-radius line-contact nude diamond (3um?70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted
Cantilever system Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system
Coils 2-layer deep, 6 N high-purity copper, chemically-purified high purity iron X-shaped former, 4.2 ohm self impedance, 11uH inductance
Output voltage 0.56 mV@5 cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range 10 Hz-50 kHz
Channel separation 35 dB or better at 1 kHz
Compliance Approx. 12 X10 cm/dyne at 100 Hz
Vertical tracking angle 20 degrees
Cartridge body Multi-material (titanium, duralumin, bronze, stainless steel) self-clamping construction with reduced-surface higher-pressure headshell contact area, predominately non-parallel shaping, phase-interference resonance-controlling mechanisms, body threaded for
Cartridge mounting screws 2.6 mm 0.45 pitch JIS standard
Cartridge weight (without stylus cover) 9.2g
Distance from mounting holes to stylus tip 9.52mm
Recommended tracking force 1.68-1.78g (1.72 g recommended)
Recommended load directly into MC phono input 104 ohm-887ohm (determine by listening, or follow detailed guidelines in owner
Recommended load via step-up transformer 5-15 ohm (connect step-up transformer
Recommended tonearm High-quality pivoted or linear (tangential) tonearm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment