Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein

Kategorie: AV-Sonstiges

Ausstattungsliste: Crestron MP-AMP30

Ausstattung & technische Daten
Typ Media Presentation Audio Amplifier
Input Volume Range -55dB to +20dB
Loudness Active at volume settings below center detent
Bass Gain Range ±15dB @ 100Hz
Treble Gain Range ±15dB @ 10kHz
Frequency Response 20Hz to 20kHz ±0.5dB
S/N Ratio 75dB 20Hz to 20kHz A-weighted
THD+N 0.7% 20Hz to 20kHz
Output Power 15 Watts per channel at 8 or 4 Ohms
Amplifier Protection Electronic short-circuit and overload protection
Connectors – Top Panel
AUDIO OUT 8Ω (2) 2-pin 3.5mm detachable terminal blocks; Left & right channel speaker-level audio outputs; Wire Size: Connector accepts 16 AWG maximum; Output Power: 15 Watts per channel at 8 or 4 Ohms
Connectors – Bottom Panel
AUDIO IN (2) RCA female, unbalanced stereo line-level audio input; Maximum Input Level: 2 Vrms; Input Impedance: 18k Ohms; 3 ft (0.9 m) stereo RCA-RCA cable included
PWR 24VDC 2.0A (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; (power pack included)
Power Requirements
Power Pack 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack included
Temperature 41° to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 21 BTU/Hr
Chassis Aluminum w/polycarbonate label overlay and (4) integral mounting flanges, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space
Mounting Freestanding or surface mount
Height 5.85 in (149 mm)
Width 3.91 in (100 mm)
Depth 1.43 in (37 mm)
Weight 11.8 oz (335 g)