394_22246_2
Topthema: Revox STUDIOMASTER M500
Das einzigartige Audio System
Mit der einfachsten Bedienung - weltweit. Patentiert von Revox.
HiFi Test 02/2023 urteilt: REFERENZKLASSE 1+
379_21926_2
Topthema: Die ewige Legende
Harwood Acoustics LS3/5A
Es gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahrenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_IC8LPT
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) polypropylene w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) titanium dome, horn loaded |
| Crossover Frequency | 2.5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30W/60W at 70V; 7.5W/15W/30W/60W at 100V |
| Frequency Response | 65 Hz to 20 kHz (±3 dB) |
| Frequency Range | 55 Hz to 20 kHz (-10 dB) |
| Power Handling | 50 Watts program (8 Ohms) |
| Sensitivity | 90 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, side-entry cable clamp |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 5.2 in (130 mm) minimum mounting depth, 11.2 in (285 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.13 in (308 mm) not including toggles |
| Depth | 5.30 in (135 mm) |
| Weight | 11.2 lb (5.0 kg) |
