615_24536_2
Topthema: Aktiv-Standlautsprecher · Loutd musegg
Kaufen oder leihen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigen
616_24538_2
Topthema: Einzeltest: Henry Audio DA 256
Open-Source-High-End
Seit meinem ersten externen D/A-Wandler (ein günstiges Gerät von Musical Fidelity) bin ich angefixt. Egal, ob man einem alten CD-Spieler klanglich auf die Sprünge helfen möchte oder ob man einfach etwas mehr Klang sucht: Ein DAC kann Wunder wirken.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Crestron SAROS_ICE8LPT
Ausstattung & technische Daten
| Features & Performance | |
| Woofer | 8 inch (203 mm) treated paper w/ring mode decoupled cloth surround & steel basket |
| Tweeter | 0.98 inch (25 mm) treated cloth dome, horn loaded |
| Crossover Frequency | 2,5 kHz |
| Impedance | 8 Ohms nominal with transformer set to "8Ω" |
| Transformer Taps | 3.75W/7.5W/15W/30WW at 70V; 7.5W/15W/30W at 100V |
| Frequency Response | 80 Hz to 20 kHz (±3 dB) |
| Frequency Range | 65 Hz to 20 kHz (-10 dB) |
| Power Handling | 60 Watts program (8 Ohms) |
| Sensitivity | 89 dB @ 1W/1m |
| Coverage | 95° conical (nominal) |
| Connections | |
| Input | (1) 4-pin 5mm detachable terminal block with screw-down flanges; Speaker input with parallel pass-thru; Maximum Wire Size: 12 AWG |
| Controls | |
| Transformer Tap | (1) Recessed screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass) |
| Environmental | |
| Temperature | -2° to 120°F (-19° to 49°C) |
| Humidity | 5% to 95% RH (non-condensing) |
| Construction | |
| Enclosure | Zinc-plated steel, plenum-rated, side-entry cable clamp |
| Baffle | ABS UL94V-0 plastic |
| Grille | Steel with white or black textured finish, paintable, magnetically-held “zero-bezel” frameless design, safety tether included |
| Mounting | Flush ceiling mount using 4 integral 2-step toggle clamps, 2.4 in (61 mm) maximum surface thickness, 5.2 in (130 mm) minimum mounting depth, 11.2 in (285 mm) diameter recommended cutout, tile bridge included, |
| (2) rigging points for safety tether (SPKA-ST-15 sold separately) | |
| Dimensions | |
| Diameter | 12.13 in (308 mm) not including toggles |
| Depth | 5.30 in (135 mm) |
| Weight | 10.8 lb (4.9 kg) |
