Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenForm follows function ist ja ein geflügeltes Wort für Design um die technischen Notwendigkeiten herum. Dass man aber auch beide Aspekte gleichwertig behandeln und auf die Spitze treiben kann, zeigt uns die neue Serie 1528 von Arendal.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Fyne Audio FA502iC
Specification | |
System Type | 2 way IsoFlare loudspeaker for in ceiling or in wall application |
Recommended amplifier power (Watt RMS) | 30 - 150 |
Continuous power handling (Watt RMS) | 75 |
Sensitivity (2.83 Volt @ 1m) | 91dB |
Nominal impedance | 8 Ohm |
Frequency response (-6dB typical in room) | 35Hz - 34kHz |
Drive unit complement | 1 x 200mm (8”) IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm titanium dome compression tweeter |
Crossover frequency | 1.7kHz |
Crossover type | Passive 2nd order low pass, 1st order high pass |
Weight - Each | 2.5kg (5.5lbs) |
Peak power handling (Watt) | 300 |
Dimensions - Dia x Depth | 273 x 123mm (10.6” x 4.8”) |
Square grille dimensions | 281 x 281mm (11.1 x 11.1”) |
Cut-out diameter | 248mm (9.8”) |
Depth behind mounting surface | 120.5mm (4.7”) |
Clamp travel | 5 - 50mm (0.2 - 2.0”) |
Round grille diameter | 281mm (11.1”) |
Suggested min volume | 18 L |