390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigen
478_17092_1
Anzeige
Topthema: Ein klingender Pflanzentopf
Revox Botanic
Für einen eleganten, überraschenden und sehr klangvollen Musikgenuss - draußen und drinnen.
>> Mehr erfahren>> Alle anzeigenKategorie: Lautsprecher Inwall
Ausstattungsliste: Tannoy CMS 501
Ausstattung & technische Daten
| Specification | |
| SYSTEM | |
| Frequency Response (-3dB) (1) BM Back can | 85Hz - 22kHz |
| Frequency Range (-10dB) (1) BM Back can | 74Hz - 24kHz |
| Frequency Range (-10dB) (1) PI Back can | 71Hz - 24kHz |
| System Sensitivity (1W @1m) (2) | 89dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Coverage Angle (1kHz to 6kHz) | 105 degrees |
| Directivity Factor (Q) | 5.6 averaged 1kHz to 6kHz |
| Directivity Index (DI) | 7.0 averaged 1kHz to 6kHz |
| Rated Maximum SPL | Average: 106dB Peak: 112PdB |
| Power Handling (3) | Average: 50W Programme: 100W Peak: 200W |
| Recommended Amplifier Power | 100W @ 6 Ohms |
| Nominal Impedance | 6 Ohms |
| Transformer Taps (via front rotary switch) | 70V: 30W / 15W / 7.5W / 3.75W / OFF & low impedance operation 100V: 30W / 15W / 7.5W / OFF & low impedance operation |
| Crossover | 7kHz inductively coupled |
| TRANSDUCERS | |
| Low Frequency | 130mm (5.00") mineral loaded polypropylene ICT™ |
| High Frequency | ICT™ aluminium dome |
| PHYSICAL | |
| Enclosure | Back Can: Zinc plated steel Baffle: Reflex loaded UL 94V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Min / Max Clamping Range: 8.0mm (0.32") / 29.0mm (1.14") Recommended Clamp Torque: 1.5Nm |
| Back Can Options | Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22mm |
| Conduit Knockouts | 3 Sets of horizontal positions: 19 / 22 / 28mm (0.75” / 0.87” / 1.10”) |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings | UL-1480, UL-2043, CE |
| BM Hole Cutout Diameter | 190mm (7.48") |
| PI Hole Cutout Diameter | 190mm (7.48") |
| Dimensions | Bezel diameter: 210mm (8.27") BM model: Front of ceiling to rear of back can 189.50mm (7.46") BM model: Front of ceiling to top of safety loop 206.80mm (8.14") |
| PI model: Front of ceiling surface to rear of speaker unit 135.60mm (5.34") PI model: Front of accessory back can bezel to top of safety loop 153.5mm (6.04") | |
| Net Weight (ea) | CMS501 BM: 3.60kg (7.94lbs) CMS501 PI: 2.90kg (6.39lbs) PI back can: 2.60kg (5.73lbs) |
| Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
| Optional Accessories | Plaster (mud) ring CMS501 PI back can |
Top Händler
|
305-2128
MD Sound GmbH & Co. KG |
