Kategorie: Lautsprecher Stereo
Ausstattungsliste: Tannoy Kensington GR
Ausstattung & technische Daten
| Specification | |
| PERFORMANCE | |
| Recommended amplifier power | 20 - 250 Watts |
| Continuous power handling | 125 Watts RMS |
| Peak power handling | 500 watt |
| Sensitivity | 93 dB (2.83 Volts @1 metre) |
| Nominal impedance | 8 Ohms |
| Minimum Impedance | 5 ohm |
| Frequency Response | 29 Hz - 27 kHz (-6 dB) |
| Dispersion | 90 degrees conical |
| DRIVE UNITS | |
| Dual Concentric™ high frequency | 52 mm (2.00") 52 mm (2”) aluminium/magnesium alloy dome with round voice coil |
| Dual Concentric™ low frequency | 250 mm (10”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil |
| CROSSOVER | |
| Frequency | 1.1kHz |
| Type | Bi-wired, hard-wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass. Deep cryogenically treated |
| Adjustment | /- 3 dB over 1 kHz to 27 kHz shelving, 2 dB to -6 dB per octave over 5 kHz to 27 kHz slope |
| CONSTRUCTION | |
| Enclosure type | Distributed Port |
| Volume | 105L (3.7 cu.ft) |
| Dimensions | 1100 x 406 x 338mm (43.50 x 16.00 x 13.33" ) |
| Finish | Particle board with high density birch ply baffle and rear panel, 18 mm (0.71”) thickness. Internally cross braced and heavily damped. |
