488_23522_2
Topthema: Ingenieurskunst in Perfektion
Revelation RX2 PRO – High-End Zweikanalendstufe von Brax
Mit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Musikserver
Ausstattungsliste: Linn Sneaky Music
Ausstattung & technische Daten
| Technical Specifications | |
| Date of introduction | March 2008 |
| Type | Network music player |
| Dimensions | (H) 44.5 mm x (W) 345 mm x (D) 274 mm ( H ) 1.8 inches x (W) 13.6 inches x (D)10.8 inches (can be positioned horizontally or vertically) |
| Weight | 2.7 kg / 6 lb |
| Mains supply voltage (auto ranging) | 100 – 120 V ac (±10%) 50 – 60 Hz, 200 – 240 V ac (±10%) 50 – 60 Hz |
| Fuse | 250 V, Tt1.6 Aa (not user replaceable) |
| Power consumption | standby 10 W operational 14 W maximum continuous 120 W |
| supported file types | flac, ALACalac, WAaV, MPp3, WMAa (except lossless), AIFFaiff, AACaac, OGG |
| Aaudio sample rates | 7.35 k, 8 k, 11.025 k, 12 k, 14.7 k, 16 k, 22.05 k, 24 k, 29.4 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k |
| Word depths | 16 – 24 bits |
| Eethernet interface | 100Base-Tt RrJ45 |
| control protocol | compatible with UPupnPp™ media servers, UP up nPp™ AaV 1.0 control points |
| local control | rs232 x 2 RrJ11 R r emote controllable (handset not supplied) |
| connector types | optical digital output tOSLINslinK coaxial digital output RCA rca phono line outputs rca phono speaker outputs I inverted safety 4 mm BFAfa sockets |
| Output impedance | line outputs 300 Ω speaker outputs 0.06 Ω |
| Output voltage | line outputs 2.8 V peak, 2 V rms (0 dBFSfs) speaker outputs 15 V peak, 10 V rms (0 dBFSfs, 16.6 dB gain, vol. 79) |
| Output offset | line outputs < 2 mV speaker outputs < 3 mV |
| signal to noise ratio line outputs | Better than -120 dB |
| channel balance | Better than +/- 0.2 dB |
| channel separation | line outputs Better than -120 dB speaker outputs Better than -100 dB |
| Gain range | -80 dB to +20 dB |
| Gain resolution | 1 dB |
| unity gain volume | 0 dB = volume 80 |
| Dynamic range | 120 dB |
| Damping factor | 67 |
| signal level for clipping | 415 mV rms (0 dBFSfs, +16.6 dB gain, vol. 79) |
| harmonic distortion | < 0.03% at 1 kHhz at 10 W |
| load tolerance | unconditionally stable into all loudspeaker loads |
| frequency response | pre-amp 2.5 Hz – 170 kHz (-3 dB), power amp 2.5 – 48 kHz (-3 dB) |
| speaker output voltage | 15 V peak |
| speaker output power | 20 W into 4 ΩW |
