411_22301_2
Topthema: High End-Standbox zum kleinen Preis
Harwood Acoustics Stand Up
Schlank und rank soll die Standbox sein und natürlich extrem tief in den Basskeller hinabreichen, bei gleichzeitig hoher Dynamik – kurz: Die eierlegende Wollmillchsau. Eine Lösung gibt es hierfür, auch wenn manche schon bei dem Wort zusammenzucken: Seitenbass.
>> Mehr erfahren>> Alle anzeigen
390_22002_2
Topthema: Sound im Audi
Audio System RFIT Audi A6 C8 Evo2 – 20er System für Audi A6
Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Aviom Boom System
Ausstattung & technische Daten
| BOOM-1 Specifications | |
| Type | Tactile Transducer Processor |
| Headphone In (front & rear) | 1/4-inch TRS stereo; Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
| Headphone Thru (front & rear) | 1/4-inch TRS stereo; Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
| Line In | XLR female, Pin 2: Hot, Pin 3: Cold; Pin 1: Ground |
| Input Impedance | 9.5k Ohm |
| Line Out | XLR balanced; mono; with Volume control |
| Maximum Output Level | 12.55 dBV |
| Output Impedance | 33.2 Ohms |
| Amplifier Output | 4 Ohms - 210W, 8 Ohms - 117W |
| Transducer Output | 2-conductor locking speaker connector |
| Power Supply | Internal, universal switching type, IEC connector; 100-240 volts AC, 50/60Hz |
| Fuse | 250VAC~ T3AL |
| Dimensions | 19" (482.6 mm) wide x 8.62" (219.07 mm) deep; 2U, 3.5" (88.9 mm) high |
| Weight | 6.0 lbs (2.72 kg) |
| CTT-1 Specifications | |
| Type | Clamp-On Transducer |
| Transducer Input | Attached, 2-conductor cable with locking connector |
| Dimensions | 6.125 x 4.375 x 4.375", 15.56 x 12.38 x 11.11 cm |
| Clamp Dimensions | Fits on posts up to 2.75" (69mm) in diameter |
| Weight | 7 lbs, 17.24 kg |
| PFS-1 Specifications | |
| Type | Performance Stool |
| Model No. | QuikLok DX-749 |
| Transducer Input | Locking, 2-conductor |
| Seat | Adjustable; 9 positions, from 22.8" to 31.5" (58 to 80 cm) |
| Depth | 12.4", 31.5 cm |
| Width | 16.3", 41.5 cm m |
| Thickness | 2.36", 60 mm |
| Backrest | Adjustable |
| Footrest | Adjustable, folding |
| Frame Width | 15.7", 40 cm |
| Frame Depth | 18.5", 47 cm |
| Weight | 38 lbs, 17.24 kg |
| PLF-1 Specifications | |
| Type | Performance Platform |
| Transducer Input | Locking, 2-conductor |
| Dimensions | 28 x 32", 71 x 81 cm |
| Weight | 33 lbs, 14.97 kg |
| KBS-1 Specifications | |
| Type | Keyboard Seat |
| Transducer Input | Locking, 2-conductor |
| Dimensions | 12.5" x 23.5", 31.75 x 58.42 cm |
| Height | Adjustable; 19.5-24.5", 48.26-64.23 cm |
| Width | 16.3", 41.5 cm |
| Depth | 12.4", 31.5 cm |
| Seat Thickness | 2.36", 60 mm |
| Weight | 24 lbs, 10.88 kg |
