So lautet der Slogan der Firma Revox. Eine Marke, die man wie wenige andere mit der Kombination aus Technik und Design verbindet. Die Studiomaster A200 ist dafür ein schönes Beispiel.
>> Mehr erfahren>> Alle anzeigen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Funktion-One F100-2
| Features | |
| High efficiency FFA Class D technology | |
| Optional DSP card (4 channel models only) | |
| Rugged tour class Aluminium construction | |
| Lightweight | |
| Side chain TCA clip limiter | |
| Signal link connectors | |
| Hand built and designed in England | |
| Specification | |
| Type | Four Channel Amplifier |
| Output Power (per channel) | 8Ω - 1500W |
| 4Ω - 3000W | |
| 2Ω - 5000W | |
| Gain | 32dB |
| THD | Typical 0.05% @ 4Ohm, 1kHz THD+N |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Controls | 40 point potentiometer per channel, power on switch |
| Indicators | signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up |
| Load Protection | DC on output, side chain TCA clip limiter circuit |
| Amplifier Protection | Short circuit, current overload, thermal shutdown, high frequency stability circuit |
| Audio Signal Inputs | Balanced Neutrik® Female XLR input connected Pin 1 - GND, Pin 2 - Hot, Pin 3 - Cold, XLR Male signal throughout each channel |
| Audio Signal Outputs | Neutrik® speakON each channel. Channels 1 & 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system, for example stage monitor system. |
| Power Requirement | 1 x Neutrik® 20A powerCON connector, 2 x 16A 240V VAC circuit. Power range 185V-240V AC |
| System Cooling | High CFM 80mm fan with proportional signal speed control. Rear to front airflow. |
| Dimensions | 483mm x 510mm x 88mm. Includes rear rack support. 19" rack mount enclosure |
| Weight | 12kg |



