Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Millennia HV-3R
Specification | |
Type | Eight Channel Remote Mic Preamplifier |
Minimum Gain | 80 dB |
Frequency Response (+0 / -3 dB) | sub 3 Hz to beyond 300 kHz |
Noise (60 dB Gain, 10 Hz - 30 kHz, Inputs common) | -133 dB EIN |
Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out) | < .001%, Typ. < .0005% (< 5 ppm) |
Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out | < .0009% |
Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out) | < 2 degrees deviation |
Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.) | > 65 dB, Typ > 85 dB |
Slew Rate (35 dB Gain, +27 dBu Out) | > 25 Volts per microsecond |
Maximum Input Level (20 Hz - 40 kHz) | +23 dBu (no attenuator pads required) |
Maximum Output Level (20 Hz - 40 kHz) | +32 dBu |
Phantom Input Impedance (1 kHz) | 6,750 ohms |
Output Impedance | 24.3 Ohms (x2) |
DPA (B&K) Mic Powering | +130 V dc max, (non-phantom) |
Phantom Powering | +48 V dc, +/- 4 V dc |
Power Consumption | 45 watts maximum |
Power Requirements | Selectable: 100-120, 200-240 V ac, 50/60 Hz |
Dimensions/Shipping Weight | 19" W x 3.5" H x 16" D, 19 lbs. |