Revox präsentiert die neue Revox B77 MK III und zugleich seine neue, eigene Revox Analog Master Tapes Collection. Beides gefertigt im Revox KLANGWERK in Villingen für ein perfektes Zusammenspiel.
>> Mehr erfahren>> Alle anzeigenMit der RX2 PRO kündigt Brax nicht weniger als die Endstufe der Superlative an, vollgepackt mit Innovation und das erste Class-D Design der Marke.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Tannoy VQNET 64DF
Performance | |
System Type | 2-Way Mid/High - Point Source |
Frequency Response (-3 dB) (1) | 400 Hz - 23 kHz |
Frequency Range (-10 dB) (1) | 350 Hz - 27 kHz |
Dispersion (-6 dB) | 60 x 40 degrees |
Driver Complement Mid/High Frequency | Dual Concentric |
Crossover | 7 kHz (DSP generated) |
Recommended High Pass | |
Filter @ 450 Hz (DSP generated) | |
Directivity Factor (Q) | 19.3 averaged 1 kHz to 10 kHz |
Directivity Index (DI) | 12.9 averaged 1 kHz to 10 kHz |
Rated Maximum SPL (2) | Average: 137 dB |
Peak: 143 dB | |
Distortion | |
110 dB SPL | 2nd Harmonic 500 Hz: 1.793%, 2 kHz: 0.878%, 5 kHz: 1.191% |
3rd Harmonic 500 Hz: 0.477%, 2 kHz: 0.048%, 5 kHz: 0.004% | |
115 dB SPL | 2nd Harmonic 500 Hz: 3.172%, 2 kHz: 1.569%, 5 kHz: 2.082% |
3rd Harmonic 500 Hz: 0.755%, 2 kHz: 0.044%, 5 kHz: 0.137% | |
120 dB SPL | 2nd Harmonic 500 Hz: 5.940%, 2 kHz: 2.716%, 5 kHz: 3.624% |
3rd Harmonic 500 Hz: 1.289%, 2 kHz: 0.157%, 5 kHz: 0.446% | |
125 dB SPL | 2nd Harmonic 500 Hz: 11.102%, 2 kHz: 4.348%, 5 kHz: 6.709% |
3rd Harmonic 500 Hz: 3.667%, 2 kHz: 0.408%, 5 kHz: 1.637% | |
Electronics | |
Efficiency | >85% typically |
Damping Factor | 120 ref 8 Ohms |
Distortion | <0.05% @ 1 kHz - 3 dB output (22 kHz bandwidth) |
Input Impedance | 5.6 kOhms (unbalanced)11.2 kOhms (balanced) |
Output Power (Programme) | 400 W Mid Frequency |
200 W High Frequency (limited to) | |
Input Sensitivity | 1.4 V (+5.5 dBu) |
System Type | Dual channel Class D |
PSU Specifications | |
Input Connector | Locking Neutrik Powercon |
Voltage Selection | Automatic (115 / 230 V, 45 - 65 Hz) |
System Type | High current, high frequency switch mode |
Efficiency | >90% typical |
Input voltage | 100 V / 115 V / 230 V nominal +/-10% |
Mains fuse | External |
Fuse type | T10AT |
Other features | Automatic soft start |
Current Draw | 115 V, 230 V |
Startup (inrush) | 3.5 A, 1.9 A |
Idle | 1.1 A, 0.56 A |
Max | 3.5 A, 1.7 A |
DSP System | |
Comms Facilities | Firmware updatable and selected parameters editable |
Communications | Serial - RS485 Proprietary message format |
Dynamic Range | 112 dB (A) typical |
DSP | 3rd generation SHARC |
Sampling Frequency | 96kHz 24 bit A/S-D/A word length |
Format | 1 IN - 2 OUT |
Construction | |
Enclosure | 18 mm (0.71") birch plywood, vented and internally braced |
Grille | Powder coated perforated steel grille |
Finish | Textured black or white paint (custom colours on request) |
Connectors | 1 x female XLR (input) 1 x male XLR (link) 1 x RJ45 (network in) 1 x RJ45 (network link) 1 x Neutrik Powercon 1 x Neutrik Powercon (outlet) |
Controls & Indicators | LED on front of cabinet behind grille (wink indicator for locating & assigning) Power LED (blue) Signal LED (green) Limit LED (red) User DSP - defeat switch Power switch |
Fittings | 2 x Recessed carrying handles |
11 x M10 flying inserts | |
Dimensions (H x W x D) | 500 x 694 x 515 mm |
Net Weight (ea) | 32.5 kg |
305-2128
MD Sound GmbH & Co. KG |