Zu den spannendsten Newcomern im Bereich Lautsprecher zählt ganz klar Neuron Acoustic. Was wir bisher aus Heilbronn gehört haben, hat uns restlos begeistert.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Turbosound iQ10
| System | |
| Type | Powered Loudspeaker |
| Frequency response | 55 Hz – 18 kHz ±3 dB |
| 50 Hz – 20 kHz -10 dB | |
| Nominal dispersion | 90° H x 60° V @ -6 dB points |
| Maximum SPL | 129 dB peak |
| Crossover type | Active |
| Transducers | 1 x 10" (256 mm) LF driver |
| 1 x 1" (25.4 mm) HF compression driver | |
| Limiter | Independent HF, LF, peak and rms |
| Amplifier | |
| Maximum output power | 2,500 W |
| Type | Class-D |
| Protection | Short circuit, open circuit, thermal |
| Connectors | |
| Input A / B | 2 x combo jack/XLR |
| Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
| Input impedance | 20 kO unbalanced, 40 kO balanced |
| Maximum input level | +21 dBu |
| Output A / B | 2 x XLR Linked to input |
| Mix output | XLR, balanced |
| Output impedance | 100 O unbalanced, 200 O balanced |
| Ultranet input/link | 2 x RJ45 |
| Mains Supply | Neutrik powerCON input 20A and link 15A |
| Controls | |
| DSP | Rotary push-encoder |
| Buttons for PROCESS, SETUP, EXIT, ENTER | |
| Mixer section | 2 x gain controls (channels A and B) |
| 2 x Line/Mic switch | |
| User DSP Functions | |
| Factory EQ presets | Positioning, Sound mode Sound modeling, FBQ |
| Display | LCD 128 x 32, blue backlit |
| Delay | 0 - 300 ms |
| Equalisation | High and low shelving EQ |
| 2 x parametric EQ | |
| Limiter | Zero attack input limiter |
| Presets | 20 total presets, 19 user-definable |
| Crossover | High Pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
| Power Supply | |
| Power consumption | 150 W @ 1/8 max power |
| Enclosure | |
| Dimensions HWD | 526 x 324 x 316 mm(20.7 x 12.7 x 12.4") |
| Net weight | 17.2 kg (38 lbs) |
| Construction | Injection-moulded polypropylene enclosure |
| Finish | Black painted |
| Grille | Powder coated perforated steel |
| Flying hardware | M10 x 3 points |




